mpv/demux/demux_timeline.c

456 lines
14 KiB
C
Raw Normal View History

Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
/*
* This file is part of mpv.
*
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
*/
#include <assert.h>
#include <limits.h>
#include "common/common.h"
#include "common/msg.h"
#include "demux.h"
#include "timeline.h"
#include "stheader.h"
#include "stream/stream.h"
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
struct segment {
int index;
double start, end;
double d_start;
char *url;
bool lazy;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
struct demuxer *d;
// stream_map[sh_stream.index] = index into priv.streams, where sh_stream
// is a stream from the source d. It's used to map the streams of the
// source onto the set of streams of the virtual timeline.
// Uses -1 for streams that do not appear in the virtual timeline.
int *stream_map;
int num_stream_map;
};
// Information for each stream on the virtual timeline. (Mirrors streams
// exposed by demux_timeline.)
struct virtual_stream {
struct sh_stream *sh; // stream exported by demux_timeline
bool selected; // ==demux_stream_is_selected(sh)
int eos_packets; // deal with b-frame delay
};
struct priv {
struct timeline *tl;
double duration;
bool dash;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
struct segment **segments;
int num_segments;
struct segment *current;
// As the demuxer user sees it.
struct virtual_stream **streams;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
int num_streams;
// Total number of packets received past end of segment. Used
// to be clever about determining when to switch segments.
int eos_packets;
};
static bool target_stream_used(struct segment *seg, int target_index)
{
for (int n = 0; n < seg->num_stream_map; n++) {
if (seg->stream_map[n] == target_index)
return true;
}
return false;
}
// Create mapping from segment streams to virtual timeline streams.
static void associate_streams(struct demuxer *demuxer, struct segment *seg)
{
struct priv *p = demuxer->priv;
if (!seg->d || seg->stream_map)
return;
int counts[STREAM_TYPE_COUNT] = {0};
int num_streams = demux_get_num_stream(seg->d);
for (int n = 0; n < num_streams; n++) {
struct sh_stream *sh = demux_get_stream(seg->d, n);
// Try associating by demuxer ID (supposedly useful for ordered chapters).
struct sh_stream *other =
demuxer_stream_by_demuxer_id(demuxer, sh->type, sh->demuxer_id);
if (!other || !target_stream_used(seg, other->index)) {
// Try to associate the first unused stream with matching media type.
for (int i = 0; i < p->num_streams; i++) {
struct sh_stream *cur = p->streams[i]->sh;
if (cur->type == sh->type && !target_stream_used(seg, cur->index))
{
other = cur;
break;
}
}
}
MP_TARRAY_APPEND(seg, seg->stream_map, seg->num_stream_map,
other ? other->index : -1);
counts[sh->type] += 1;
}
}
static void reselect_streams(struct demuxer *demuxer)
{
struct priv *p = demuxer->priv;
for (int n = 0; n < p->num_streams; n++) {
struct virtual_stream *vs = p->streams[n];
vs->selected = demux_stream_is_selected(vs->sh);
}
for (int n = 0; n < p->num_segments; n++) {
struct segment *seg = p->segments[n];
for (int i = 0; i < seg->num_stream_map; i++) {
if (!seg->d)
continue;
struct sh_stream *sh = demux_get_stream(seg->d, i);
bool selected = false;
if (seg->stream_map[i] >= 0)
selected = p->streams[seg->stream_map[i]]->selected;
// This stops demuxer readahead for inactive segments.
if (!p->current || seg->d != p->current->d)
selected = false;
demuxer_select_track(seg->d, sh, MP_NOPTS_VALUE, selected);
}
}
}
static void close_lazy_segments(struct demuxer *demuxer)
{
struct priv *p = demuxer->priv;
// unload previous segment
for (int n = 0; n < p->num_segments; n++) {
struct segment *seg = p->segments[n];
if (seg != p->current && seg->d && seg->lazy) {
free_demuxer_and_stream(seg->d);
seg->d = NULL;
}
}
}
static void reopen_lazy_segments(struct demuxer *demuxer)
{
struct priv *p = demuxer->priv;
if (p->current->d)
return;
close_lazy_segments(demuxer);
struct demuxer_params params = {
.init_fragment = p->tl->init_fragment,
.skip_lavf_probing = true,
};
p->current->d = demux_open_url(p->current->url, &params,
demuxer->stream->cancel, demuxer->global);
2017-02-04 22:10:04 +00:00
if (!p->current->d && !demux_cancel_test(demuxer))
MP_ERR(demuxer, "failed to load segment\n");
if (p->current->d)
demux_disable_cache(p->current->d);
associate_streams(demuxer, p->current);
}
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
static void switch_segment(struct demuxer *demuxer, struct segment *new,
double start_pts, int flags, bool init)
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
{
struct priv *p = demuxer->priv;
if (!(flags & SEEK_FORWARD))
flags |= SEEK_HR;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
MP_VERBOSE(demuxer, "switch to segment %d\n", new->index);
p->current = new;
reopen_lazy_segments(demuxer);
if (!new->d)
return;
reselect_streams(demuxer);
if (!p->dash)
demux_set_ts_offset(new->d, new->start - new->d_start);
if (!p->dash || !init)
demux_seek(new->d, start_pts, flags);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
for (int n = 0; n < p->num_streams; n++) {
struct virtual_stream *vs = p->streams[n];
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
vs->eos_packets = 0;
}
p->eos_packets = 0;
}
static void d_seek(struct demuxer *demuxer, double seek_pts, int flags)
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
{
struct priv *p = demuxer->priv;
double pts = seek_pts * ((flags & SEEK_FACTOR) ? p->duration : 1);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
flags &= SEEK_FORWARD | SEEK_HR;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
struct segment *new = p->segments[p->num_segments - 1];
for (int n = 0; n < p->num_segments; n++) {
if (pts < p->segments[n]->end) {
new = p->segments[n];
break;
}
}
switch_segment(demuxer, new, pts, flags, false);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
}
static int d_fill_buffer(struct demuxer *demuxer)
{
struct priv *p = demuxer->priv;
if (!p->current)
switch_segment(demuxer, p->segments[0], 0, 0, true);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
struct segment *seg = p->current;
if (!seg || !seg->d)
return 0;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
struct demux_packet *pkt = demux_read_any_packet(seg->d);
if (!pkt || pkt->pts >= seg->end)
p->eos_packets += 1;
// Test for EOF. Do this here to properly run into EOF even if other
// streams are disabled etc. If it somehow doesn't manage to reach the end
// after demuxing a high (bit arbitrary) number of packets, assume one of
// the streams went EOF early.
bool eos_reached = p->eos_packets > 0;
if (eos_reached && p->eos_packets < 100) {
for (int n = 0; n < p->num_streams; n++) {
struct virtual_stream *vs = p->streams[n];
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
if (vs->selected) {
int max_packets = 0;
if (vs->sh->type == STREAM_AUDIO)
max_packets = 1;
if (vs->sh->type == STREAM_VIDEO)
max_packets = 16;
eos_reached &= vs->eos_packets >= max_packets;
}
}
}
if (eos_reached || !pkt) {
talloc_free(pkt);
struct segment *next = NULL;
for (int n = 0; n < p->num_segments - 1; n++) {
if (p->segments[n] == seg) {
next = p->segments[n + 1];
break;
}
}
if (!next)
return 0;
switch_segment(demuxer, next, next->start, 0, true);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
return 1; // reader will retry
}
if (pkt->stream < 0 || pkt->stream > seg->num_stream_map)
goto drop;
if (!p->dash) {
pkt->segmented = true;
if (!pkt->codec)
pkt->codec = demux_get_stream(seg->d, pkt->stream)->codec;
if (pkt->start == MP_NOPTS_VALUE || pkt->start < seg->start)
pkt->start = seg->start;
if (pkt->end == MP_NOPTS_VALUE || pkt->end > seg->end)
pkt->end = seg->end;
}
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
pkt->stream = seg->stream_map[pkt->stream];
if (pkt->stream < 0)
goto drop;
// for refresh seeks, demux.c prefers monotonically increasing packet pos
// since the packet pos is meaningless anyway for timeline, use it
if (pkt->pos >= 0)
pkt->pos |= (seg->index & 0x7FFFULL) << 48;
struct virtual_stream *vs = p->streams[pkt->stream];
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
if (pkt->pts != MP_NOPTS_VALUE && pkt->pts >= seg->end) {
// Trust the keyframe flag. Might not always be a good idea, but will
// be sufficient at least with mkv. The problem is that this flag is
// not well-defined in libavformat and is container-dependent.
if (pkt->keyframe || vs->eos_packets == INT_MAX) {
vs->eos_packets = INT_MAX;
goto drop;
} else {
vs->eos_packets += 1;
}
}
demux_add_packet(vs->sh, pkt);
return 1;
drop:
talloc_free(pkt);
return 1;
}
static void print_timeline(struct demuxer *demuxer)
{
struct priv *p = demuxer->priv;
MP_VERBOSE(demuxer, "Timeline segments:\n");
for (int n = 0; n < p->num_segments; n++) {
struct segment *seg = p->segments[n];
int src_num = n;
for (int i = 0; i < n - 1; i++) {
if (seg->d && p->segments[i]->d == seg->d) {
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
src_num = i;
break;
}
}
MP_VERBOSE(demuxer, " %2d: %12f [%12f] (", n, seg->start, seg->d_start);
for (int i = 0; i < seg->num_stream_map; i++)
MP_VERBOSE(demuxer, "%s%d", i ? " " : "", seg->stream_map[i]);
MP_VERBOSE(demuxer, ") %d:'%s'\n", src_num, seg->url);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
}
MP_VERBOSE(demuxer, "Total duration: %f\n", p->duration);
if (p->dash)
MP_VERBOSE(demuxer, "Durations and offsets are non-authoritative.\n");
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
}
static int d_open(struct demuxer *demuxer, enum demux_check check)
{
struct priv *p = demuxer->priv = talloc_zero(demuxer, struct priv);
p->tl = demuxer->params ? demuxer->params->timeline : NULL;
if (!p->tl || p->tl->num_parts < 1)
return -1;
p->duration = p->tl->parts[p->tl->num_parts].start;
demuxer->chapters = p->tl->chapters;
demuxer->num_chapters = p->tl->num_chapters;
struct demuxer *meta = p->tl->track_layout;
demuxer->metadata = meta->metadata;
demuxer->attachments = meta->attachments;
demuxer->num_attachments = meta->num_attachments;
demuxer->editions = meta->editions;
demuxer->num_editions = meta->num_editions;
demuxer->edition = meta->edition;
demuxer->duration = p->duration;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
int num_streams = demux_get_num_stream(meta);
for (int n = 0; n < num_streams; n++) {
struct sh_stream *sh = demux_get_stream(meta, n);
struct sh_stream *new = demux_alloc_sh_stream(sh->type);
new->demuxer_id = sh->demuxer_id;
new->codec = sh->codec;
new->title = sh->title;
new->lang = sh->lang;
new->default_track = sh->default_track;
new->forced_track = sh->forced_track;
new->hls_bitrate = sh->hls_bitrate;
new->missing_timestamps = sh->missing_timestamps;
new->attached_picture = sh->attached_picture;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
demux_add_sh_stream(demuxer, new);
struct virtual_stream *vs = talloc_ptrtype(p, vs);
*vs = (struct virtual_stream){
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
.sh = new,
};
MP_TARRAY_APPEND(p, p->streams, p->num_streams, vs);
}
for (int n = 0; n < p->tl->num_parts; n++) {
struct timeline_part *part = &p->tl->parts[n];
struct timeline_part *next = &p->tl->parts[n + 1];
// demux_timeline already does caching, doing it for the sub-demuxers
// would be pointless and wasteful.
if (part->source)
demux_disable_cache(part->source);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
struct segment *seg = talloc_ptrtype(p, seg);
*seg = (struct segment){
.d = part->source,
.url = part->source ? part->source->filename : part->url,
.lazy = !part->source,
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
.d_start = part->source_start,
.start = part->start,
.end = next->start,
};
associate_streams(demuxer, seg);
seg->index = n;
MP_TARRAY_APPEND(p, p->segments, p->num_segments, seg);
}
p->dash = p->tl->dash;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
print_timeline(demuxer);
demuxer->seekable = true;
demuxer->partially_seekable = false;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
demuxer->filetype = meta->filetype ? meta->filetype : meta->desc->name;
demuxer->is_network = p->tl->demuxer->is_network;
reselect_streams(demuxer);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
return 0;
}
static void d_close(struct demuxer *demuxer)
{
struct priv *p = demuxer->priv;
struct demuxer *master = p->tl->demuxer;
p->current = NULL;
close_lazy_segments(demuxer);
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
timeline_destroy(p->tl);
free_demuxer(master);
}
static int d_control(struct demuxer *demuxer, int cmd, void *arg)
{
if (cmd == DEMUXER_CTRL_SWITCHED_TRACKS) {
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
reselect_streams(demuxer);
return CONTROL_OK;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
}
return CONTROL_UNKNOWN;
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
}
const demuxer_desc_t demuxer_desc_timeline = {
.name = "timeline",
.desc = "timeline segments",
Rewrite ordered chapters and timeline stuff This uses a different method to piece segments together. The old approach basically changes to a new file (with a new start offset) any time a segment ends. This meant waiting for audio/video end on segment end, and then changing to the new segment all at once. It had a very weird impact on the playback core, and some things (like truly gapless segment transitions, or frame backstepping) just didn't work. The new approach adds the demux_timeline pseudo-demuxer, which presents an uniform packet stream from the many segments. This is pretty similar to how ordered chapters are implemented everywhere else. It also reminds of the FFmpeg concat pseudo-demuxer. The "pure" version of this approach doesn't work though. Segments can actually have different codec configurations (different extradata), and subtitles are most likely broken too. (Subtitles have multiple corner cases which break the pure stream-concatenation approach completely.) To counter this, we do two things: - Reinit the decoder with each segment. We go as far as allowing concatenating files with completely different codecs for the sake of EDL (which also uses the timeline infrastructure). A "lighter" approach would try to make use of decoder mechanism to update e.g. the extradata, but that seems fragile. - Clip decoded data to segment boundaries. This is equivalent to normal playback core mechanisms like hr-seek, but now the playback core doesn't need to care about these things. These two mechanisms are equivalent to what happened in the old implementation, except they don't happen in the playback core anymore. In other words, the playback core is completely relieved from timeline implementation details. (Which honestly is exactly what I'm trying to do here. I don't think ordered chapter behavior deserves improvement, even if it's bad - but I want to get it out from the playback core.) There is code duplication between audio and video decoder common code. This is awful and could be shareable - but this will happen later. Note that the audio path has some code to clip audio frames for the purpose of codec preroll/gapless handling, but it's not shared as sharing it would cause more pain than it would help.
2016-02-15 20:04:07 +00:00
.fill_buffer = d_fill_buffer,
.open = d_open,
.close = d_close,
.seek = d_seek,
.control = d_control,
};