mpv/video/decode/vdpau.c

206 lines
6.0 KiB
C
Raw Normal View History

vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
/*
* This file is part of mpv.
*
* mpv is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with mpv. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stddef.h>
#include <assert.h>
#include <libavcodec/avcodec.h>
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
#include <libavcodec/vdpau.h>
#include <libavutil/common.h>
#include "config.h"
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
#include "lavc.h"
#include "common/common.h"
#include "common/av_common.h"
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
#include "video/fmt-conversion.h"
#include "video/vdpau.h"
#include "video/hwdec.h"
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
struct priv {
2013-12-21 17:05:23 +00:00
struct mp_log *log;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
struct mp_vdpau_ctx *mpvdp;
struct vdp_functions *vdp;
uint64_t preemption_counter;
int fmt, w, h;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
AVVDPAUContext *context;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
};
#define PE(av_codec_id, ff_profile, vdp_profile) \
{AV_CODEC_ID_ ## av_codec_id, FF_PROFILE_ ## ff_profile, \
VDP_DECODER_PROFILE_ ## vdp_profile}
static const struct hwdec_profile_entry profiles[] = {
PE(MPEG1VIDEO, UNKNOWN, MPEG1),
PE(MPEG2VIDEO, MPEG2_MAIN, MPEG2_MAIN),
PE(MPEG2VIDEO, MPEG2_SIMPLE, MPEG2_SIMPLE),
PE(MPEG4, MPEG4_ADVANCED_SIMPLE, MPEG4_PART2_ASP),
PE(MPEG4, MPEG4_SIMPLE, MPEG4_PART2_SP),
PE(H264, H264_HIGH, H264_HIGH),
PE(H264, H264_MAIN, H264_MAIN),
PE(H264, H264_BASELINE, H264_BASELINE),
PE(VC1, VC1_ADVANCED, VC1_ADVANCED),
PE(VC1, VC1_MAIN, VC1_MAIN),
PE(VC1, VC1_SIMPLE, VC1_SIMPLE),
PE(WMV3, VC1_ADVANCED, VC1_ADVANCED),
PE(WMV3, VC1_MAIN, VC1_MAIN),
PE(WMV3, VC1_SIMPLE, VC1_SIMPLE),
{0}
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
};
static int init_decoder(struct lavc_ctx *ctx, int fmt, int w, int h)
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
{
struct priv *p = ctx->hwdec_priv;
struct vdp_functions *vdp = &p->mpvdp->vdp;
VdpDevice vdp_device = p->mpvdp->vdp_device;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
VdpStatus vdp_st;
p->fmt = fmt;
p->w = w;
p->h = h;
// During preemption, pretend everything is ok.
if (mp_vdpau_handle_preemption(p->mpvdp, &p->preemption_counter) < 0)
return 0;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
if (p->context->decoder != VDP_INVALID_HANDLE)
vdp->decoder_destroy(p->context->decoder);
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
const struct hwdec_profile_entry *pe = hwdec_find_profile(ctx, profiles);
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
if (!pe) {
2013-12-21 17:05:23 +00:00
MP_ERR(p, "Unsupported codec or profile.\n");
goto fail;
}
VdpBool supported;
uint32_t maxl, maxm, maxw, maxh;
vdp_st = vdp->decoder_query_capabilities(vdp_device, pe->hw_profile,
&supported, &maxl, &maxm,
&maxw, &maxh);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(p, "Querying VDPAU decoder capabilities");
if (!supported) {
2013-12-21 17:05:23 +00:00
MP_ERR(p, "Codec or profile not supported by hardware.\n");
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
goto fail;
}
if (w > maxw || h > maxh) {
MP_ERR(p, "Video resolution(%dx%d) is larger than the maximum size(%dx%d) supported.\n",
w, h, maxw, maxh);
goto fail;
}
int maxrefs = hwdec_get_max_refs(ctx);
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
vdp_st = vdp->decoder_create(vdp_device, pe->hw_profile, w, h, maxrefs,
&p->context->decoder);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(p, "Failed creating VDPAU decoder");
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
if (vdp_st != VDP_STATUS_OK)
goto fail;
2014-03-19 18:35:25 +00:00
return 0;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
fail:
p->context->decoder = VDP_INVALID_HANDLE;
2014-03-19 18:35:25 +00:00
return -1;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
}
static struct mp_image *allocate_image(struct lavc_ctx *ctx, int fmt,
int w, int h)
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
{
struct priv *p = ctx->hwdec_priv;
if (mp_vdpau_handle_preemption(p->mpvdp, &p->preemption_counter) == 0) {
if (init_decoder(ctx, p->fmt, p->w, p->h) < 0)
return NULL;
}
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
VdpChromaType chroma;
mp_vdpau_get_format(IMGFMT_VDPAU, &chroma, NULL);
return mp_vdpau_get_video_surface(p->mpvdp, chroma, w, h);
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
}
static void uninit(struct lavc_ctx *ctx)
{
struct priv *p = ctx->hwdec_priv;
if (!p)
return;
if (p->context && p->context->decoder != VDP_INVALID_HANDLE)
p->vdp->decoder_destroy(p->context->decoder);
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
av_free(p->context);
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
talloc_free(p);
ctx->hwdec_priv = NULL;
}
static int init(struct lavc_ctx *ctx)
{
struct priv *p = talloc_ptrtype(NULL, p);
*p = (struct priv) {
2013-12-21 17:05:23 +00:00
.log = mp_log_new(p, ctx->log, "vdpau"),
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
.mpvdp = ctx->hwdec_info->vdpau_ctx,
};
ctx->hwdec_priv = p;
#if HAVE_AVCODEC_VDPAU_ALLOC_CONTEXT
p->context = av_vdpau_alloc_context();
#else
p->context = av_mallocz(sizeof(AVVDPAUContext));
#endif
if (!p->context)
goto error;
p->vdp = &p->mpvdp->vdp;
p->context->render = p->vdp->decoder_render;
p->context->decoder = VDP_INVALID_HANDLE;
if (mp_vdpau_handle_preemption(p->mpvdp, &p->preemption_counter) < 1)
goto error;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
ctx->avctx->hwaccel_context = p->context;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
return 0;
error:
uninit(ctx);
return -1;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
}
static int probe(struct vd_lavc_hwdec *hwdec, struct mp_hwdec_info *info,
const char *decoder)
{
hwdec_request_api(info, "vdpau");
if (!info || !info->vdpau_ctx)
return HWDEC_ERR_NO_CTX;
if (!hwdec_check_codec_support(decoder, profiles))
return HWDEC_ERR_NO_CODEC;
if (mp_vdpau_guess_if_emulated(info->vdpau_ctx))
return HWDEC_ERR_EMULATED;
return 0;
}
const struct vd_lavc_hwdec mp_vd_lavc_vdpau = {
.type = HWDEC_VDPAU,
.image_format = IMGFMT_VDPAU,
.probe = probe,
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
.init = init,
.uninit = uninit,
.init_decoder = init_decoder,
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
.allocate_image = allocate_image,
};