mpv/common/playlist.c

425 lines
14 KiB
C
Raw Normal View History

mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
/*
* This file is part of mpv.
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
*
* mpv is distributed in the hope that it will be useful,
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* GNU Lesser General Public License for more details.
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
*/
#include <assert.h>
#include "playlist.h"
#include "common/common.h"
#include "common/global.h"
#include "common/msg.h"
#include "misc/random.h"
#include "mpv_talloc.h"
#include "options/path.h"
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
#include "demux/demux.h"
#include "stream/stream.h"
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
struct playlist_entry *playlist_entry_new(const char *filename)
{
struct playlist_entry *e = talloc_zero(NULL, struct playlist_entry);
char *local_filename = mp_file_url_to_filename(e, bstr0(filename));
e->filename = local_filename ? local_filename : talloc_strdup(e, filename);
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
e->stream_flags = STREAM_ORIGIN_DIRECT;
e->original_index = -1;
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return e;
}
void playlist_entry_add_param(struct playlist_entry *e, bstr name, bstr value)
{
struct playlist_param p = {bstrdup(e, name), bstrdup(e, value)};
MP_TARRAY_APPEND(e, e->params, e->num_params, p);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
void playlist_entry_add_params(struct playlist_entry *e,
struct playlist_param *params,
int num_params)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
{
for (int n = 0; n < num_params; n++)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_entry_add_param(e, params[n].name, params[n].value);
}
static void playlist_update_indexes(struct playlist *pl, int start, int end)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
{
start = MPMAX(start, 0);
end = end < 0 ? pl->num_entries : MPMIN(end, pl->num_entries);
for (int n = start; n < end; n++)
pl->entries[n]->pl_index = n;
}
// Inserts the entry so that it takes "at"'s place, shifting "at" and all
// further entires to the right (or append to end, if at==NULL).
void playlist_insert_at(struct playlist *pl, struct playlist_entry *add,
struct playlist_entry *at)
{
assert(add->filename);
assert(!at || at->pl == pl);
int index = at ? at->pl_index : pl->num_entries;
MP_TARRAY_INSERT_AT(pl, pl->entries, pl->num_entries, index, add);
add->pl = pl;
add->pl_index = index;
add->id = ++pl->id_alloc;
playlist_update_indexes(pl, index, pl->num_entries);
talloc_steal(pl, add);
}
void playlist_entry_unref(struct playlist_entry *e)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
{
e->reserved--;
if (e->reserved < 0) {
assert(!e->pl);
talloc_free(e);
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
void playlist_remove(struct playlist *pl, struct playlist_entry *entry)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
{
assert(pl && entry->pl == pl);
if (pl->current == entry) {
pl->current = playlist_entry_get_rel(entry, 1);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
pl->current_was_replaced = true;
}
MP_TARRAY_REMOVE_AT(pl->entries, pl->num_entries, entry->pl_index);
playlist_update_indexes(pl, entry->pl_index, -1);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
entry->pl = NULL;
entry->pl_index = -1;
ta_set_parent(entry, NULL);
entry->removed = true;
playlist_entry_unref(entry);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
void playlist_clear(struct playlist *pl)
{
for (int n = pl->num_entries - 1; n >= 0; n--)
playlist_remove(pl, pl->entries[n]);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
assert(!pl->current);
pl->current_was_replaced = false;
}
void playlist_clear_except_current(struct playlist *pl)
{
for (int n = pl->num_entries - 1; n >= 0; n--) {
if (pl->entries[n] != pl->current)
playlist_remove(pl, pl->entries[n]);
}
}
// Moves the entry so that it takes "at"'s place (or move to end, if at==NULL).
void playlist_move(struct playlist *pl, struct playlist_entry *entry,
struct playlist_entry *at)
{
if (entry == at)
return;
assert(entry && entry->pl == pl);
assert(!at || at->pl == pl);
int index = at ? at->pl_index : pl->num_entries;
MP_TARRAY_INSERT_AT(pl, pl->entries, pl->num_entries, index, entry);
int old_index = entry->pl_index;
if (old_index >= index)
old_index += 1;
MP_TARRAY_REMOVE_AT(pl->entries, pl->num_entries, old_index);
playlist_update_indexes(pl, MPMIN(index - 1, old_index - 1),
MPMAX(index + 1, old_index + 1));
}
void playlist_append_file(struct playlist *pl, const char *filename)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
{
playlist_insert_at(pl, playlist_entry_new(filename), NULL);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
void playlist_populate_playlist_path(struct playlist *pl, const char *path)
{
for (int n = 0; n < pl->num_entries; n++) {
struct playlist_entry *e = pl->entries[n];
e->playlist_path = talloc_strdup(e, path);
}
}
void playlist_shuffle(struct playlist *pl)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
{
for (int n = 0; n < pl->num_entries; n++)
pl->entries[n]->original_index = n;
for (int n = 0; n < pl->num_entries - 1; n++) {
size_t j = (size_t)((pl->num_entries - n) * mp_rand_next_double());
MPSWAP(struct playlist_entry *, pl->entries[n], pl->entries[n + j]);
}
playlist_update_indexes(pl, 0, -1);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
#define CMP_INT(a, b) ((a) == (b) ? 0 : ((a) > (b) ? 1 : -1))
static int cmp_unshuffle(const void *a, const void *b)
{
struct playlist_entry *ea = *(struct playlist_entry **)a;
struct playlist_entry *eb = *(struct playlist_entry **)b;
if (ea->original_index >= 0 && ea->original_index != eb->original_index)
return CMP_INT(ea->original_index, eb->original_index);
return CMP_INT(ea->pl_index, eb->pl_index);
}
void playlist_unshuffle(struct playlist *pl)
{
if (pl->num_entries)
qsort(pl->entries, pl->num_entries, sizeof(pl->entries[0]), cmp_unshuffle);
playlist_update_indexes(pl, 0, -1);
}
// (Explicitly ignores current_was_replaced.)
struct playlist_entry *playlist_get_first(struct playlist *pl)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
{
return pl->num_entries ? pl->entries[0] : NULL;
}
// (Explicitly ignores current_was_replaced.)
struct playlist_entry *playlist_get_last(struct playlist *pl)
{
return pl->num_entries ? pl->entries[pl->num_entries - 1] : NULL;
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
struct playlist_entry *playlist_get_next(struct playlist *pl, int direction)
{
assert(direction == -1 || direction == +1);
if (!pl->current)
return NULL;
assert(pl->current->pl == pl);
if (direction < 0)
return playlist_entry_get_rel(pl->current, -1);
return pl->current_was_replaced ? pl->current :
playlist_entry_get_rel(pl->current, 1);
}
// (Explicitly ignores current_was_replaced.)
struct playlist_entry *playlist_entry_get_rel(struct playlist_entry *e,
int direction)
{
assert(direction == -1 || direction == +1);
if (!e->pl)
return NULL;
return playlist_entry_from_index(e->pl, e->pl_index + direction);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
struct playlist_entry *playlist_get_first_in_next_playlist(struct playlist *pl,
int direction)
{
struct playlist_entry *entry = playlist_get_next(pl, direction);
if (!entry)
return NULL;
while (entry && entry->playlist_path && pl->current->playlist_path &&
strcmp(entry->playlist_path, pl->current->playlist_path) == 0)
entry = playlist_entry_get_rel(entry, direction);
if (direction < 0)
entry = playlist_get_first_in_same_playlist(entry,
pl->current->playlist_path);
return entry;
}
struct playlist_entry *playlist_get_first_in_same_playlist(
struct playlist_entry *entry, char *current_playlist_path)
{
void *tmp = talloc_new(NULL);
if (!entry || !entry->playlist_path)
goto exit;
// Don't go to the beginning of the playlist when the current playlist-path
// starts with the previous playlist-path, e.g. with mpv --loop-playlist
// archive_dir/, which expands to archive_dir/{1..9}.zip, the current
// playlist path "archive_dir/1.zip" begins with the playlist-path
// "archive_dir/" of {2..9}.zip, so go to 9.zip instead of 2.zip. But
// playlist-prev-playlist from e.g. the directory "foobar" to the directory
// "foo" should still go to the first entry in "foo/", and this should all
// work whether mpv's arguments have trailing slashes or not, e.g. in the
// first example:
// mpv archive_dir results in the playlist-paths "archive_dir/1.zip" and
// "archive_dir"
// mpv archive_dir/ in "archive_dir/1.zip" and "archive_dir/"
// mpv archive_dir// in "archive_dir//1.zip" and "archive_dir//"
// Always adding a separator to entry->playlist_path to fix the foobar foo
// case would break the previous 2 cases instead. Stripping the separator
// from entry->playlist_path if present and appending it again makes this
// work in all cases.
char* playlist_path = talloc_strdup(tmp, entry->playlist_path);
mp_path_strip_trailing_separator(playlist_path);
if (bstr_startswith(bstr0(current_playlist_path),
bstr0(talloc_strdup_append(playlist_path, "/")))
#if HAVE_DOS_PATHS
||
bstr_startswith(bstr0(current_playlist_path),
bstr0(talloc_strdup_append(playlist_path, "\\")))
#endif
)
goto exit;
struct playlist_entry *prev = playlist_entry_get_rel(entry, -1);
while (prev && prev->playlist_path &&
strcmp(prev->playlist_path, entry->playlist_path) == 0) {
entry = prev;
prev = playlist_entry_get_rel(entry, -1);
}
exit:
talloc_free(tmp);
return entry;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
void playlist_add_base_path(struct playlist *pl, bstr base_path)
{
if (base_path.len == 0 || bstrcmp0(base_path, ".") == 0)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return;
for (int n = 0; n < pl->num_entries; n++) {
struct playlist_entry *e = pl->entries[n];
if (!mp_is_url(bstr0(e->filename))) {
char *new_file = mp_path_join_bstr(e, base_path, bstr0(e->filename));
talloc_free(e->filename);
e->filename = new_file;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
}
void playlist_set_stream_flags(struct playlist *pl, int flags)
{
for (int n = 0; n < pl->num_entries; n++)
pl->entries[n]->stream_flags = flags;
}
int64_t playlist_transfer_entries_to(struct playlist *pl, int dst_index,
struct playlist *source_pl)
{
assert(pl != source_pl);
struct playlist_entry *first = playlist_get_first(source_pl);
int count = source_pl->num_entries;
MP_TARRAY_INSERT_N_AT(pl, pl->entries, pl->num_entries, dst_index, count);
for (int n = 0; n < count; n++) {
struct playlist_entry *e = source_pl->entries[n];
e->pl = pl;
e->pl_index = dst_index + n;
e->id = ++pl->id_alloc;
pl->entries[e->pl_index] = e;
talloc_steal(pl, e);
}
playlist_update_indexes(pl, dst_index + count, -1);
source_pl->num_entries = 0;
return first ? first->id : 0;
}
// Move all entries from source_pl to pl, appending them after the current entry
// of pl. source_pl will be empty, and all entries have changed ownership to pl.
// Return the new ID of the first added entry within pl (0 if source_pl was
// empty). The IDs of all added entries increase by 1 each entry (you can
// predict the ID of the last entry).
int64_t playlist_transfer_entries(struct playlist *pl, struct playlist *source_pl)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
{
int add_at = pl->num_entries;
if (pl->current) {
add_at = pl->current->pl_index + 1;
if (pl->current_was_replaced)
add_at += 1;
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
assert(add_at >= 0);
assert(add_at <= pl->num_entries);
return playlist_transfer_entries_to(pl, add_at, source_pl);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
int64_t playlist_append_entries(struct playlist *pl, struct playlist *source_pl)
{
return playlist_transfer_entries_to(pl, pl->num_entries, source_pl);
}
// Return number of entries between list start and e.
// Return -1 if e is not on the list, or if e is NULL.
int playlist_entry_to_index(struct playlist *pl, struct playlist_entry *e)
{
if (!e || e->pl != pl)
return -1;
return e->pl_index;
}
int playlist_entry_count(struct playlist *pl)
{
return pl->num_entries;
}
// Return entry for which playlist_entry_to_index() would return index.
// Return NULL if not found.
struct playlist_entry *playlist_entry_from_index(struct playlist *pl, int index)
{
return index >= 0 && index < pl->num_entries ? pl->entries[index] : NULL;
}
struct playlist *playlist_parse_file(const char *file, struct mp_cancel *cancel,
struct mpv_global *global)
{
struct mp_log *log = mp_log_new(NULL, global->log, "!playlist_parser");
mp_verbose(log, "Parsing playlist file %s...\n", file);
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
struct demuxer_params p = {
.force_format = "playlist",
.stream_flags = STREAM_ORIGIN_DIRECT,
};
struct demuxer *d = demux_open_url(file, &p, cancel, global);
if (!d) {
talloc_free(log);
return NULL;
}
struct playlist *ret = NULL;
if (d && d->playlist) {
ret = talloc_zero(NULL, struct playlist);
playlist_populate_playlist_path(d->playlist, file);
playlist_transfer_entries(ret, d->playlist);
if (d->filetype && strcmp(d->filetype, "hls") == 0) {
mp_warn(log, "This might be a HLS stream. For correct operation, "
"pass it to the player\ndirectly. Don't use --playlist.\n");
}
}
demux_free(d);
if (ret) {
mp_verbose(log, "Playlist successfully parsed\n");
} else {
mp_err(log, "Error while parsing playlist\n");
}
if (ret && !ret->num_entries)
mp_warn(log, "Warning: empty playlist\n");
talloc_free(log);
return ret;
}