mediamtx/README.md

# rtsp-simple-server

[![Build Status](https://travis-ci.org/aler9/rtsp-simple-server.svg?branch=master)](https://travis-ci.org/aler9/rtsp-simple-server)
[![Go Report Card](https://goreportcard.com/badge/github.com/aler9/rtsp-simple-server)](https://goreportcard.com/report/github.com/aler9/rtsp-simple-server)
[![Docker Hub](https://img.shields.io/badge/docker-aler9%2Frtsp--simple--server-blue)](https://hub.docker.com/r/aler9/rtsp-simple-server)

_rtsp-simple-server_ is a simple, ready-to-use and zero-dependency RTSP server and RTSP proxy, a software that allows multiple users to publish and read live video and audio streams over time. RTSP, RTP and RTCP are standardized protocol that describe how to perform these operations with the help of a server, that is contacted by both readers and publishers in order to negotiate a streaming protocol. The server is then responsible of relaying the publisher streams to the readers.

Features:
* Read and publish live streams via UDP and TCP
* Each stream can have multiple video and audio tracks, encoded in any format
* Publish multiple streams at once, each in a separate path, that can be read by multiple users
* Pull and serve streams from other RTSP servers, always or on-demand (RTSP proxy)
* Provide separate authentication for reading and publishing
* Run custom commands when clients connect, disconnect, read or publish streams
* Compatible with Linux, Windows and Mac, does not require any dependency or interpreter, it's a single executable

## Installation and basic usage

1. Download and extract a precompiled binary from the [release page](https://github.com/aler9/rtsp-simple-server/releases).

2. Start the server:
   ```
   ./rtsp-simple-server
   ```

3. Publish a stream. For instance, you can publish a video file with _FFmpeg_:
   ```
   ffmpeg -re -stream_loop -1 -i file.ts -c copy -f rtsp rtsp://localhost:8554/mystream
   ```

   or _GStreamer_:
   ```
   gst-launch-1.0 filesrc location=file.mp4 ! qtdemux ! rtspclientsink location=rtsp://localhost:8554/mystream
   ```

4. Open the stream. For instance, you can open the stream with _VLC_:
   ```
   vlc rtsp://localhost:8554/mystream
   ```

   or _GStreamer_:
   ```
   gst-launch-1.0 rtspsrc location=rtsp://localhost:8554/mystream ! rtph264depay ! decodebin ! autovideosink
   ```

   or _FFmpeg_:
   ```
   ffmpeg -i rtsp://localhost:8554/mystream -c copy output.mp4
   ```

## Advanced usage and FAQs

### Usage with Docker

Download and launch the image:
```
docker run --rm -it --network=host aler9/rtsp-simple-server
```

The `--network=host` argument is mandatory since Docker can change the source port of UDP packets for routing reasons, and this makes RTSP routing impossible. To avoid the option, disable UDP and expose the RTSP port, by creating a file named `rtsp-simple-server.yml` with the following content:
```yaml
protocols: [tcp]
```

and passing it to the container:
```
docker run --rm -it -v $PWD/rtsp-simple-server.yml:/rtsp-simple-server.yml -p 8554:8554 aler9/rtsp-simple-server
```

### Full configuration file

To see or change the configuration, edit the `rtsp-simple-server.yml` file, provided with the executable. The default configuration is [available here](rtsp-simple-server.yml).

### Usage as RTSP Proxy

An RTSP proxy is usually deployed in one of these scenarios:
* when there are multiple users that are receiving a stream and the bandwidth is limited, so the proxy is used to receive the stream once. Users can then connect to the proxy instead of the original source.
* when there's a NAT / firewall between a stream and the users, in this case the proxy is installed on the NAT and makes the stream available to the outside world.

Edit `rtsp-simple-server.yml` and replace everything inside section `paths` with the following content:
```yaml
paths:
  proxied:
    # url of the source stream, in the format rtsp://user:pass@host:port/path
    source: rtsp://original-url
```

After starting the server, users can connect to `rtsp://localhost:8554/proxied`, instead of connecting to the original url. The server supports any number of source streams, it's enough to add additional entries to the `paths` section.

### Serve a webcam

Edit `rtsp-simple-server.yml` and replace everything inside section `paths` with the following content:
```yaml
paths:
  cam:
    runOnInit: ffmpeg -f v4l2 -i /dev/video0 -f rtsp rtsp://localhost:8554/$RTSP_SERVER_PATH
```

After starting the server, the webcam can be opened with `rtsp://localhost:8554/cam`. The ffmpeg command works only on Linux; for Windows and Mac equivalents, read the [ffmpeg wiki](https://trac.ffmpeg.org/wiki/Capture/Webcam).

### Serve a Raspberry Pi Camera

Install dependencies:
1. Gstreamer
   ```
   sudo apt install -y gstreamer1.0-tools gstreamer1.0-rtsp
   ```

2. gst-rpicamsrc, by following [instruction here](https://github.com/thaytan/gst-rpicamsrc)

Then edit `rtsp-simple-server.yml` and replace everything inside section `paths` with the following content:
```yaml
paths:
  cam:
    runOnInit: gst-launch-1.0 rpicamsrc preview=false bitrate=2000000 keyframe-interval=50 ! video/x-h264,width=1920,height=1080,framerate=25/1 ! rtspclientsink location=rtsp://localhost:8554/$RTSP_SERVER_PATH
```

After starting the server, the webcam can be opened with `rtsp://localhost:8554/cam`.

### On-demand publishing

Edit `rtsp-simple-server.yml` and replace everything inside section `paths` with the following content:
```yaml
paths:
  ondemand:
    runOnDemand: ffmpeg -re -stream_loop -1 -i file.ts -c copy -f rtsp rtsp://localhost:8554/$RTSP_SERVER_PATH
```

The command inserted into `runOnDemand` will start only when a client requests the path `ondemand`, therefore the file will start streaming only when requested.

### Remuxing, re-encoding, compression

To change the format, codec or compression of a stream, you must use _FFmpeg_ or _Gstreamer_ together with _rtsp-simple-server_. For instance, to re-encode an existing stream, that is available in the `/original` path, and publish the resulting stream in the `/compressed` path, edit `rtsp-simple-server.yml` and replace everything inside section `paths` with the following content:
```yaml
paths:
  all:
  original:
    runOnPublish: ffmpeg -i rtsp://localhost:8554/$RTSP_SERVER_PATH -b:a 64k -c:v libx264 -preset ultrafast -b:v 500k -max_muxing_queue_size 1024 -f rtsp rtsp://localhost:8554/compressed
```

### Authentication

Edit `rtsp-simple-server.yml` and replace everything inside section `paths` with the following content:
```yaml
paths:
  all:
    publishUser: admin
    publishPass: mypassword
```

Only publishers that provide both username and password will be able to proceed:
```
ffmpeg -re -stream_loop -1 -i file.ts -c copy -f rtsp rtsp://admin:mypassword@localhost:8554/mystream
```

It's possible to setup authentication for readers too:
```yaml
paths:
  all:
    publishUser: admin
    publishPass: mypassword

    readUser: user
    readPass: userpassword
```

WARNING: RTSP is a plain protocol, and the credentials can be intercepted and read by malicious users (even if hashed, since the only supported hash method is md5, which is broken). If you need a secure channel, use RTSP inside a VPN.

### Start on boot with systemd

Systemd is the service manager used by Ubuntu, Debian and many other Linux distributions, and allows to launch rtsp-simple-server on boot.

Download a release bundle from the [release page](https://github.com/aler9/rtsp-simple-server/releases), and put:
* `rtsp-simple-server` in `/usr/local/bin`
* `rtsp-simple-server.yml` in `/usr/local/etc`

Create a file `/etc/systemd/system/rtsp-simple-server.service` with the following content:
```
[Unit]
After=network.target
[Service]
ExecStart=/usr/local/bin/rtsp-simple-server /usr/local/etc/rtsp-simple-server.yml
[Install]
WantedBy=multi-user.target
```

Enable and start the service with:
```
systemctl enable rtsp-simple-server
systemctl start rtsp-simple-server
```

### Monitoring

There are multiple ways to monitor the server usage over time:
* The current number of clients, publishers and readers is printed in each log line; for instance, the line:
  ```
  2020/01/01 00:00:00 [2/1/1] [client 127.0.0.1:44428] OPTION
  ```
  means that there are 2 clients, 1 publisher and 1 reader.

* A metrics exporter, compatible with Prometheus, can be enabled with the option `metrics: yes`; then the server can be queried for metrics with Prometheus or with a simple HTTP request:
  ```
  wget -qO- localhost:9998
  ```
  Obtaining:
  ```
  rtsp_clients{state="idle"} 2 1596122687740
  rtsp_clients{state="publishing"} 15 1596122687740
  rtsp_clients{state="reading"} 8 1596122687740
  ```

  where:
  * `rtsp_clients{state="idle"}` is the count of clients that are neither publishing nor reading
  * `rtsp_clients{state="publishing"}` is the count of clients that are publishing
  * `rtsp_clients{state="reading"}` is the count of clients that are reading
  * `rtsp_proxies{state="idle"}` is the count of proxy sources that are not running
  * `rtsp_proxies{state="running"}` is the count of proxy sources that are running

* A performance monitor, compatible with pprof, can be enabled with the option `pprof: yes`; then the server can be queried for metrics with pprof-compatible tools, like:
  ```
  docker run --rm -it --network=host golang:1.14 go tool pprof -text http://localhost:9999/debug/pprof/goroutine
  docker run --rm -it --network=host golang:1.14 go tool pprof -text http://localhost:9999/debug/pprof/heap
  docker run --rm -it --network=host golang:1.14 go tool pprof -text http://localhost:9999/debug/pprof/profile?seconds=30
  ```

### Full command-line usage

```
usage: rtsp-simple-server [<flags>]

rtsp-simple-server v0.0.0

RTSP server.

Flags:
  --help     Show context-sensitive help (also try --help-long and --help-man).
  --version  print version

Args:
  [<confpath>]  path to a config file. The default is rtsp-simple-server.yml. Use 'stdin' to
                read config from stdin
```

### Compile and run from source

Install Go &ge; 1.12, download the repository, open a terminal in it and run:
```
go run .
```

You can perform the entire operation inside Docker with:
```
make run
```

## Links

Related projects
* https://github.com/aler9/gortsplib (RTSP library used internally)
* https://github.com/flaviostutz/rtsp-relay
* https://github.com/pion/sdp (SDP library used internally)
* https://github.com/pion/rtcp (RTCP library used internally)

IETF Standards
* RTSP 1.0 https://tools.ietf.org/html/rfc2326
* RTSP 2.0 https://tools.ietf.org/html/rfc7826
* HTTP 1.1 https://tools.ietf.org/html/rfc2616