mediamtx/rtsp-simple-server.yml

###############################################
# General options

# sets the verbosity of the program; available values are "warn", "info", "debug".
logLevel: info
# destinations of log messages; available values are "stdout", "file" and "syslog".
logDestinations: [stdout]
# if "file" is in logDestinations, this is the file which will receive the logs.
logFile: rtsp-simple-server.log

# listen IP. If provided, all listeners will listen on this specific IP.
listenIP:
# timeout of read operations.
readTimeout: 10s
# timeout of write operations.
writeTimeout: 10s
# number of read buffers.
# a higher number allows a higher throughput,
# a lower number allows to save RAM.
readBufferCount: 512

# enable Prometheus-compatible metrics.
metrics: no
# port of the metrics listener.
metricsPort: 9998

# enable pprof on port 9999 to monitor performances.
pprof: no

# command to run when a client connects to the server.
# this is terminated with SIGINT when a client disconnects from the server.
# the server port is available in the RTSP_PORT variable.
runOnConnect:
# the restart parameter allows to restart the command if it exits suddenly.
runOnConnectRestart: no

###############################################
# RTSP options

# disable support for the RTSP protocol.
rtspDisable: no
# supported RTSP stream protocols.
# UDP is the most performant, but can cause problems if there's a NAT between
# server and clients, and doesn't support encryption.
# TCP is the most versatile, and does support encryption.
# The handshake is always performed with TCP.
protocols: [udp, tcp]
# encrypt handshake and TCP streams with TLS (RTSPS).
# available values are "no", "strict", "optional".
encryption: no
# port of the TCP/RTSP listener. This is used only if encryption is "no" or "optional".
rtspPort: 8554
# port of the TCP/TLS/RTSPS listener. This is used only if encryption is "strict" or "optional".
rtspsPort: 8555
# port of the UDP/RTP listener. This is used only if "udp" is in protocols.
rtpPort: 8000
# port of the UDP/RTCP listener. This is used only if "udp" is in protocols.
rtcpPort: 8001
# path to the server key. This is used only if encryption is "strict" or "optional".
serverKey: server.key
# path to the server certificate. This is used only if encryption is "strict" or "optional".
serverCert: server.crt
# authentication methods.
authMethods: [basic, digest]
# read buffer size.
# this doesn't influence throughput and shouldn't be touched unless the server
# reports errors about the buffer size.
readBufferSize: 2048

###############################################
# RTMP options

# disable support for the RTMP protocol.
rtmpDisable: no
# port of the RTMP listener.
rtmpPort: 1935

###############################################
# Path options

# these settings are path-dependent.
# it's possible to use regular expressions by using a tilde as prefix.
# for example, "~^(test1|test2)$" will match both "test1" and "test2".
# for example, "~^prefix" will match all paths that start with "prefix".
# the settings under the path "all" are applied to all paths that do not match
# another entry.
paths:
  all:
    # source of the stream - this can be:
    # * record -> the stream is published by a RTSP or RTMP client
    # * rtsp://existing-url -> the stream is pulled from another RTSP server
    # * rtsps://existing-url -> the stream is pulled from another RTSP server
    # * rtmp://existing-url -> the stream is pulled from a RTMP server
    # * redirect -> the stream is provided by another path or server
    source: record

    # if the source is an RTSP URL, this is the protocol that will be used to
    # pull the stream. available options are "automatic", "udp", "tcp".
    # the tcp protocol can help to overcome the error "no UDP packets received recently".
    sourceProtocol: automatic

    # if the source is an RTSP or RTMP URL, it will be pulled only when at least
    # one reader is connected, saving bandwidth.
    sourceOnDemand: no
    # if sourceOnDemand is "yes", readers will be put on hold until the source is
    # ready or until this amount of time has passed.
    sourceOnDemandStartTimeout: 10s
    # if sourceOnDemand is "yes", the source will be closed when there are no
    # readers connected and this amount of time has passed.
    sourceOnDemandCloseAfter: 10s

    # if the source is "redirect", this is the RTSP URL which clients will be
    # redirected to.
    sourceRedirect:

    # fallback stream to redirect clients to when nobody is publishing to this path.
    # this can be a relative path  (i.e. /otherstream) or an absolute RTSP URL.
    fallback:

    # username required to publish.
    # sha256-hashed values can be inserted with the "sha256:" prefix.
    publishUser:
    # password required to publish.
    # sha256-hashed values can be inserted with the "sha256:" prefix.
    publishPass:
    # ips or networks (x.x.x.x/24) allowed to publish.
    publishIps: []

    # username required to read.
    # sha256-hashed values can be inserted with the "sha256:" prefix.
    readUser:
    # password required to read.
    # sha256-hashed values can be inserted with the "sha256:" prefix.
    readPass:
    # ips or networks (x.x.x.x/24) allowed to read.
    readIps: []

    # command to run when this path is initialized.
    # this can be used to publish a stream and keep it always opened.
    # this is terminated with SIGINT when the program closes.
    # the path name is available in the RTSP_PATH variable.
    # the server port is available in the RTSP_PORT variable.
    runOnInit:
    # the restart parameter allows to restart the command if it exits suddenly.
    runOnInitRestart: no

    # command to run when this path is requested.
    # this can be used to publish a stream on demand.
    # this is terminated with SIGINT when the path is not requested anymore.
    # the path name is available in the RTSP_PATH variable.
    # the server port is available in the RTSP_PORT variable.
    runOnDemand:
    # the restart parameter allows to restart the command if it exits suddenly.
    runOnDemandRestart: no
    # readers will be put on hold until the runOnDemand command starts publishing
    # or until this amount of time has passed.
    runOnDemandStartTimeout: 10s
    # the runOnDemand command will be closed when there are no
    # readers connected and this amount of time has passed.
    runOnDemandCloseAfter: 10s

    # command to run when a client starts publishing.
    # this is terminated with SIGINT when a client stops publishing.
    # the path name is available in the RTSP_PATH variable.
    # the server port is available in the RTSP_PORT variable.
    runOnPublish:
    # the restart parameter allows to restart the command if it exits suddenly.
    runOnPublishRestart: no

    # command to run when a clients starts reading.
    # this is terminated with SIGINT when a client stops reading.
    # the path name is available in the RTSP_PATH variable.
    # the server port is available in the RTSP_PORT variable.
    runOnRead:
    # the restart parameter allows to restart the command if it exits suddenly.
    runOnReadRestart: no