This isn't used in practice anywhere within libav at the moment,
but change it for consistency until it is removed.
URL_RDONLY/WRONLY were fixed in commit 5b81e29593 (after the
values that actually were used were changed at the major bump,
in commit cbea3ac8), but this flag was unintentionally left unfixed.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the creation time is stored in the file as a zero, the
mov demuxer skips exporting the creation time. Currently,
files muxed without a creation time get demuxed with a
Jan 1st 1970 creation timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
rtsp.h relies on network.h and the latter conditionally defines fallback OS
structures that rely on configure tests, which are only run if networking
is enabled.
Align IEC 61937 length_code for DTS-HD so that
(length_code & 0xf) == 0x8. This is reportedly needed with some
receivers.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The implicit network initialization is set to be removed in the
future, but is kept for compatibility. By not doing the implicit
initialization for non-network protocols, we avoid the warning
about avformat_network_init() not being called for these, where
it really doesn't make much sense.
Signed-off-by: Martin Storsjö <martin@martin.st>
This definition is in two files, since the definitions will move
to the private header at the next bump.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes an invalid free() with ass in avi. The sample in bug 98 passes
parts of AVPacket.data as buffer for the AVIOContext. Since the packet
is quite large fill_buffer tries to reallocate the buffer before doing
nothing. Fixes bug 98.
The fate-h264-bsf-mp4toannexb failures were caused by an integer
overflow of the unneeded multiplication.
Inspired by patch by: Michael Niedermayer <michaelni@gmx.at>
According to draft-pantos-http-live-streaming-07, 6.3.4,
the duration of the last media segment in the playlist
should be used as initial minimum reload delay.
Signed-off-by: Martin Storsjö <martin@martin.st>
With the current default PES packet size, and very small audio bitrates,
audio packet duration gets too long. For players, which wait for a whole
audio packet (or more) it takes a very long time to start playing sound.
For 24kbps audio, one PES packet is about 1 second long. On Motorola STBs,
we observe about 3 second delay before the playback starts with the
default setting.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Do not assume the audio packets being always smaller than
DEFAULT_PES_PAYLOAD_SIZE.
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The 'fiel' atoms can be found in H.264 tracks clobbering the extradata.
MJPEG supports non field based extradata, and this data should be
preserved when copying.
This fixes demuxing of file where the first packet is not audio. Such files
are generated by our idroq muxer. It also fixes demuxing of audio only
idroq files.
Compared to just overwriting the old extradata, this has the
advantage of letting the decoder know exactly when the
extradata changed (otherwise it is changed immediately when the
new extradata packet is demuxed, even if there's old queued packets
awaiting to be decoded). This makes it easier for decoders to
actually react to the change, so they won't have to inspect
the extradata for each packet to see if it might have changed.
This works when sequentially playing a file with sample rate
changes, but if seeking past a new extradata packet in the
file, it obviously doesn't work properly. That case doesn't
work in flash player either, so it's probably ok not to handle
it.
Signed-off-by: Martin Storsjö <martin@martin.st>
Support Main Profile at High 1440 Level in MXF container,
using essence coding label from SMPTE RDD 9, table 6.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Audio header information might get scrambled and would not parse,
yet wsqva_read_packet would try to parse audio packets causing
segfaults such as floating point exception.
Fixes bugzilla #141.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a segfault if the probe function wasn't able to
determine the format.
The bug was found by Panagiotis H.M. Issaris.
Signed-off-by: Martin Storsjö <martin@martin.st>
v410 is a packed 10-bit 4:4:4 YCbCr format used in
QuickTime.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
It sets the supplied AVFormatContext pointer to NULL after freeing it,
which is safer and its name is consistent with other lavf functions.
Also deprecate av_close_input_file().
The existing functions defined in intfloat_readwrite.[ch] are
both slow and incorrect (infinities are not handled).
This introduces a new header with fast, inline conversion
functions using direct union punning assuming an IEEE-754
system, an assumption already made throughout the code.
The one use of Intel/Motorola extended 80-bit format is
replaced by simpler code sufficient under the present
constraints (positive normal values).
The old functions are marked deprecated and retained for
compatibility.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If the sdp is generated before the rtp muxer is initialized
(e.g. as when called from the rtsp muxer), this has to be done,
otherwise the rtp muxer doesn't know that the input really is
in mp4 format.
Signed-off-by: Martin Storsjö <martin@martin.st>
If an annex b bitstream is muxed into mov, the actual written
sample is reformatted to mp4 syntax before writing.
Currently, the RTP hints that copy data from the normal video
track, where the payload data might be offset compared to the
original sample that the RTP hinting used (when 3 byte
annex b startcodes have been converted into 4 byte mp4 format
startcodes).
Signed-off-by: Martin Storsjö <martin@martin.st>
This implements reading the tag in the demuxer and adds support for writing it
in the muxer. Some example channel layout tables for muxing are included for
ac3, aac, and alac, but they are not utilized yet.
Use Sound Sample Description Version 2 for all MOV files.
Updated FATE references accordingly.
Note that ADPCM is treated as compressed audio in version 2.
704af3e29c broke publishing
of rtmp streams, at least publishing to Wowza servers.
This changes all invoke commands to use nb_invokes.
Signed-off-by: Martin Storsjö <martin@martin.st>
malloc() is allowed to return NULL when zero is the argument. This
causes us to think malloc has failed and return AVERROR(ENOMEM). In
addition OS X malloc() returns an unfreeable non-NULL pointer for size
zero when alignment is greater than 16.
Pass the correct size in bits to mpeg4audio_get_config and add a flag
to disable parsing of the sync extension when the size is not known.
Latm with AudioMuxVersion 0 does not specify the size of the audio
specific config. Data after the audio specific config can be
misinterpreted as sync extension resulting in random and wrong configs.
Commit 035af99 made avconv always call an encoder when using the
null muxer. While useful for 2-pass encodes, it inadvertently
caused an extra memcpy of raw frames when decoding only.
This hack restores the old behaviour when only decoding while
allowing use of the null muxer with encoded streams as well.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The media_type_mask is initialized via AVOptions for the
rtsp and sdp demuxers, but it isn't available as an option
for the rtp guessing demuxer (since it doesn't really make
sense there). Therefore, it must be manually initialized
instead, since a zero value means no media types at all
are accepted.
Signed-off-by: Martin Storsjö <martin@martin.st>
For the standardized 8 kHz sample rate, this works exactly the same.
For nonstandard sample rates, the different predefined G726
names (G726-16, G726-24, G726-32, G726-40) are interpreted as an
indication of the bits per coded sample, even though their
actual bitrates aren't what the name specifies.
This feels more sane than using free-form names for nonstandard
sample rate/bitrate combinations, e.g like G726-22, G726-33
for 11025 Hz.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids overflow if frame_size is over 2147, since both
frame_size and AV_TIME_BASE are plain integers.
Signed-off-by: Martin Storsjö <martin@martin.st>
Not yet complete, for demuxing AAC the AAC header must be generated
manually.
Possibly the decoder could accept the header as extradata to simplify
this.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This simplifies the open functions by avoiding one function
call that needs error checking, reducing the amount of
extra bulk code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This string will be passed to ff_http_auth_create_response
even if no proxy is used, resulting in reading uninitialized
memory. The other auth string is always initialized by
av_url_split.
Signed-off-by: Martin Storsjö <martin@martin.st>
Anton Khirnov
Alex Converse
Paul B Mahol
Daniel Huang
Martin Storsjö
Justin Ruggles
Janne Grunau
Diego Biurrun
Michael Niedermayer
Anssi Hannula
Chris Evans
Shitiz Garg
Jean First
Reimar Döffinger
Carl Eugen Hoyos
Andrey Utkin
Jindřich Makovička
Tomas Härdin
Daniel Kristjansson
Baptiste Coudurier
Sergey Radionov
Luca Barbato
Michael Karcher
Vladimir Pantelic
Derek Buitenhuis
Mans Rullgard
Luca Abeni
Kostya Shishkov
Chris Berov
David Goldwich
John Stebbins