* commit '1c169782cae6c5c430ff62e7d7272dc9d0e8d527':
avconv: explicitly postpone writing the header until all streams are initialized
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This is a bit messy, mainly due to timestamp handling.
decode_video() relied on the fact that it could set dts on a flush/drain
packet. This is not possible with the old API, and won't be. (I think
doing this was very questionable with the old API. Flush packets should
not contain any information; they just cause a FIFO to be emptied.) This
is replaced with checking the best_effort_timestamp for AV_NOPTS_VALUE,
and using the suggested DTS in the drain case.
The modified tests (fate-cavs and others) still fails due to dropping
the last frame. This happens because the timestamp of the last frame
goes backwards (ffprobe -show_frames shows the same thing). I suspect
that this "worked" due to the best effort timestamp logic picking the
DTS over the decreasing PTS. Since this logic is in libavcodec (where
it probably shouldn't be), this can't be easily fixed. The timestamps
of the cavs samples are weird anyway, so I chose not to fix it.
Another strange thing is the timestamp handling in the video path of
process_input_packet (after the decode_video() call). It looks like
the code to increase next_dts and next_pts should be run every time
a frame is decoded - but it's needed even if output is skipped.
With the new decode API, doing this in ffmpeg.c is impractical. There
was resistance against removing the warning, so put it into libavcodec.
Not bothering with reducing the warning to verbose log level for
subsequent wanrings. The warning should be rare, and only happen when
developing new codecs for the old API.
Includes a change suggested by Michael Niedermayer.
This commit is based on commit 35c8580 from Anton Khirnov <anton@khirnov.net>
which was skipped in b8945c4.
The avcodec_copy_context() call in the encode path is left in place for now
as AVStream.codec is apparently still required even after porting ffmpeg to
the new bsf API.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit is initially largely based on commit 4426540 from Anton
Khirnov <anton@khirnov.net> and two following fixes (80fb19b and
fe7b21c) which were previously skipped respectively in 98e3153, c9ee36e,
and 7fe7cdc.
mpeg4-bsf-unpack-bframes FATE reference is updated because the bsf
filter now actually fixes the extradata (mpeg4_unpack_bframes_init()
changing one byte is now honored on the output extradata).
The FATE references for remove_extra change because the packet flags
were wrong and the keyframes weren't marked, causing the bsf relying on
these proprieties to not actually work as intended.
The following was fixed by James Almer:
The filter option arguments are now also parsed correctly.
A hack to propagate extradata changed by bitstream filters after the
first av_bsf_receive_packet() call is added to maintain the current
behavior. This was previously done by av_bitstream_filter_filter() and
is needed for the aac_adtstoasc bsf.
The exit_on_error was not being checked anymore, and led to an exit
error in the last frame of h264_mp4toannexb test. Restoring this
behaviour prevents erroring out. The test is still changed as a result
due to the badly filtered frame now not being written after the failure.
Signed-off-by: Clément Bœsch <u@pkh.me>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit is largely based on commit 15e84ed3 from Anton Khirnov
<anton@khirnov.net> which was previously skipped in bbf5ef9d.
There are still a bunch of things raising codecpar related warnings that
need fixing, such as:
- the use of codec->debug in the interactive debug mode
- read_ffserver_streams(): it's probably broken now but there is no test
- lowres stuff
- codec copy apparently required by bitstream filters
The matroska references are updated because they now properly forward
the field_order (previously unknown, now progressive).
Thanks to James Almer for fixing a bunch of FATE issues in this commit.
Signed-off-by: Clément Bœsch <clement@stupeflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '49670e4218d34899a1c37abb7a11615efc16f757':
avconv: add a function for determining whether a filtergraph is simple
Conflicts:
avconv.c
Merged-by: Timothy Gu <timothygu99@gmail.com>
* commit 'bd49be885e9ad6bae599c54473ba2fa2957eb140':
avconv_vdpau: use the hwcontext API to simplify code
Tested-by: wm4
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
a set ost->frame_rate does not imply CFR in ffmpeg
The changed fate tests had all wrong packet durations
(like 1/1000 or 1/90000)
There might be more cases in which is_cfr could be set
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'fb472e1a11a4e0caed2c3c91da01ea8e35d9e3f8':
avconv: add support for Intel QSV-accelerated transcoding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '5d3addb937946eca5391e40b5e6308e74ac6f77b':
Add a quality factor packet side data
Conflicts:
doc/APIchanges
ffmpeg.c
libavcodec/avcodec.h
libavcodec/mpegvideo_enc.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '16302246b1fcb7ad4e6f7bd31c49956a455336d2':
avconv: Add an option for automatically rotating video according to display matrix
Conflicts:
Changelog
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This improves the last frames duration with CFR and when the input durations
are inaccurate or missing
Fixes Ticket4119
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Allow printing of sdp information to a file specified by -sdp_file
This allows users to print sdp information when at least one of the
outputs isn't an rtp stream.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The format is now:
-bsf:X filter1[=opt1=str1/opt2=str2],filter2
ie the parameters are appended after the filter name using '='. As ','
has been reserved already for the list of filters, '/' is just an
example of token separation for now, but that could become part of the
API to avoid each bsf using its own tokenization.
The proper solution would be using AVOption, but this is overkill for now.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This improves the handling of cases where the frame duration is not known
Fixes Ticket 4119
Fixes Ticket 1578
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '383136264ef40452efd86cafb2d7221cd3830b3d':
avconv: do not use the stream codec context for encoding
Conflicts:
ffmpeg.c
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '41776ba9c0ebbb71394cefdf7dd1b243e6c852d5':
avconv: do not use the stream codec context for decoding
Conflicts:
ffmpeg.c
ffmpeg_filter.c
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes 1 frame error in the duration and derived values,
introduced by not using AVStream.pts in the previous commit
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Michael Niedermayer
Hendrik Leppkes
wm4
James Almer
Clément Bœsch
Timothy Gu
Timo Rothenpieler
Derek Buitenhuis
Rodger Combs
Bryan Huh
Marton Balint
Sebastien Zwickert
Michael Niedermayer
Nicolas George
Simon Thelen
Christophe Gisquet