The DC VLC table used is too small, fixing this requires a sample,
thus request a sample.
Some samples are said to work even though the table has the wrong size, thus
this is left enabled if the user enables experimental features.
Fixes: 2abd25478c62a675f335fac00b467023/asan_static-oob_10aff98_1227_8811480c6ef1e970a7977ceb7e5a9958.mxf
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Approved-by: kurosu
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This allows more efficient access to the array as the level and flags
are contiguous. Around 4% faster coefficient decoding.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Profiles 1256 & 1270 (currently) signal at the frame header and MB
levels the colorspace used, either RGB or YUV. While a MB-level
varying colorspace is not supported, whether it is constant can be
tracked so as to determine the exact colorspace.
This requires having bitdepth and the ACT and 4:4:4 flags, in turn
needing the CID. Because setting those before having validated
enough things may result in invalid/unset DSP fucntions, setting
the bitdepth in the context is delayed.
It is not tested against a true RGB sequence, though.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These are DNxHR profiles with the following properties:
- Variable size in a profile (property added in a previous commit),
requiring variable-sized macroblock table;
- Variable bitdepth, up to 12 bits.
- Better validation of buffer sizes and positions
Signed-off-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This a 4:4:4 10 bits profile, where image size is not fixed by the
profile, and which strays a bit outside the old frame header parsing
code.
Fixes ticket #4581 (DNxHR is not stricly supported, but that sequence is).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently not used, but will be used to indicate that a CIDEntry field
is not set, because it is variable, and that checks should be adapted.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The current one, while correct, does not yield the best possible
results. The specificiations suggest another formula, which results
in quality gains in the decoded output from fate tests. This
justifies changing said formula.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This bit is 1 in some samples, and seems to coincide with interlaced
mbs and CID1260. 2008 specs do not know about it, and maintain qscale
is 11 bits. This looks oversized, but may help larger bitdepths.
Currently, it leads to an obviously incorrect qscale value, meaning
its syntax is shifted by 1. However, reading 11 bits also leads to
obviously incorrect decoding: qscale seems to be 10 bits.
However, as most profiles still have 11bits qscale, the feature is
restricted to the CID1260 profile (this flag is dependent on
a higher-level flag located in the header).
The encoder writes 12 bits of syntax, last and first bits always 0,
which is now somewhat inconsistent with the decoder, but ends up with
the same effect (progressive + reserved bit).
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Each line is padded by the format, and errors are now reported and
stop the decoding. Around 5% speedup.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Around 3x speedup with 4 threads. Maybe more mb lines should be
batched per thread, but that's good enough for a first try.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Indicates a YCbCr->RGB transform at the block level. Although nothing
explicitly states it, this would assume the actual content is planar
RGB.
Currently unsupported, but the one sequence I found using it flagged
every mb that way, actually meaning the content was YCbCr, and thus
best left to the output format to decide what to do of it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It currently only applies to CID 1260, but this flag is dependent on
a higher-level flag located in the header.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This bit is 1 in some samples, and seems to coincide with interlaced
mbs and CID1260. 2008 specs do not know about it, and maintain qscale
is 11 bits. This looks oversized, but may help larger bitdepths.
Currently, it leads to an obviously incorrect qscale value, meaning
its syntax is shifted by 1. However, reading 11 bits also leads to
obviously incorrect decoding: qscale seems to be 10 bits.
However, as most profiles still have 11bits qscale, the feature is
restricted to the CID1260 profile.
The encoder writes 12 bits of syntax, last and first bits always 0,
which is now somewhat inconsistent with the decoder, but ends up with
the same effect (progressive + reserved bit).
Partially fixes ticket #4876.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '1a07df31128da3a0020b66502399989b91770d44':
DNxHD: Add support for id 1258 (DNx100 960x720@8)
Conflicts:
Changelog
libavcodec/dnxhddata.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array accesses
Fixes: asan_heap-oob_22c9a39_16_015.mxf
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Mark Reid
Michael Niedermayer
Christophe Gisquet
Jeremy James
Hendrik Leppkes
Vittorio Giovara
Michael Niedermayer
Carl Eugen Hoyos