With the introduction of AVFilterContext->is_disabled, we can simplify
the custom passthrough mode in filters.
This commit is technically a small compat break, but the timeline was
introduced very recently.
Doxy by Stefano Sabatini.
* commit '507b1e454cf9953da3e18f33c9bd1fca78c97cb5':
avcodec: Add field order information to AVCodecParserContext.
Conflicts:
doc/APIchanges
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA
markup is muxed in a standalone .ass/.ssa file. This means the AVPacket
data starts with a "Dialogue:" string, followed by a timing information
(start and end of the event as string) and a trailing CRLF after each
line. One packet can contain several lines. We'll refer to this layout
as "SSA" or "SSA lines".
In matroska, this markup is not stored as such: it has no "Dialogue:"
prefix, it contains a ReadOrder field, the timing information is not in
the payload, and it doesn't contain the trailing CRLF. See [1] for more
info. We'll refer to this layout as "ASS".
Since we have only one common codec for both formats, the matroska
demuxer is constructing an AVPacket following the "SSA lines" format.
This causes several problems, so it was decided to change this into
clean ASS packets.
Some insight about what is changed or unchanged in this commit:
CODECS
------
- the decoding process still writes "SSA lines" markup inside the ass
fields of the subtitles rectangles (sub->rects[n]->ass), which is
still the current common way of representing decoded subtitles
markup. It is meant to change later.
- new ASS codec id: AV_CODEC_ID_ASS (which is different from the
legacy AV_CODEC_ID_SSA)
- lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of
"ass") for consistency with the codec id and allows to add a real
ass decoder. This ass decoder receives clean ASS lines (so it starts
with a ReadOrder, is followed by the Layer, etc). We make sure this
is decoded properly in a new ass-line rectangle of the decoded
subtitles (the ssa decoder OTOH is doing a simple straightforward
copy). Using the packet timing instead of data string makes sure the
ass-line now contains the appropriate timing.
- lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed
into "ssa" (instead of "ass") for consistency with the codec id, and
allows to add a real "ass" encoder.
One important thing about this encoder is that it only supports one
ass rectangle: we could have put several dialogue events in the
AVPacket (separated by a \0 for instance) but this would have cause
trouble for the muxer which needs not only the start time, but also
the duration: typically, you have merged events with the same start
time (stored in the AVPacket->pts) but a different duration. At the
moment, only the matroska do the merge with the SSA-line codec.
We will need to make sure all the decoders in the future can't add
more than one rectangle (and only one Dialogue line in it
obviously).
FORMATS
-------
- lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets.
In the case of ASS packets as input, it adds the timing based on the
AVPacket pts and duration, and mux it with "Dialogue:", trailing
CRLF, etc.
- lavf/assdec: unchanged; it currently still only outputs SSA-lines
packets.
- lavf/mkv: the demuxer can now output ASS packets without the need of
any "SSA-lines" reconstruction hack. It will become the default at
next libavformat bump, and the SSA support will be dropped from the
demuxer. The muxer can take ASS packets since it's muxed normally,
and still supports the old SSA packets. All the SSA support and
hacks in Matroska code will be dropped at next lavf bump.
[1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
* commit 'fa2a34cd40d124161c748bb0f430dc63c94dd0da':
lavfi: change the filter registering system to match the other libraries
Conflicts:
cmdutils.c
ffplay.c
libavfilter/avfilter.c
libavfilter/avfilter.h
This removes the ability to put AVFilters in read only memory and having
them shareable.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7e8fe4be5fb4c98aa3c6a4ed3cec999f4e3cc3aa':
lavfi: add a function for counting elements in AVFilterPad arrays.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7cdd737ba81b5c2c9521c4509edf0ac315fabc65':
lavfi: mark filters with dynamic number of inputs or outputs with special flags
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1ba95a9cca57b023b9b9de071a5671fc05b05e58':
lavfi: add avfilter_init_dict() for initializing a filter with a dict.
Conflicts:
libavfilter/avfilter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add av_int_list_length() to compute a list length.
Add av_opt_set_int_list() to set a binary option.
Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '48a5adab62bd2a553f5069d41fa632a0701835e5':
lavfi: add avfilter_init_str() to replace avfilter_init_filter().
avfilter_graph_create_filter() opaque is still passed to avfilter_init_filter()
which continues to pass it to init_opaque as its still used in the buffer sinks
the sinks should be changed and the opaque passing removed
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since this function adds a standalone filter to a filter graph and we do
not support creating such filters, there is no reason for this function
to exist.
Since we do not support "standalone" filters not attached to an
AVFilterGraph, we should not have a public function to create such
filters. In addition that function is horribly named, the action it does
cannot be possibly described as "opening" a filter.
* commit '2e81acc687e64d15dd93c74793060bb5a233f44d':
x86inc: Fix number of operands for cmp* instructions
af_channelmap: fix uninitialized variable use introduced in ba8efac977
lavfi: add a bump and docs entries for the AVOptions switch
Conflicts:
Changelog
doc/APIchanges
libavfilter/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2c328a907978b61949fd20f7c991803174337855':
pixdesc: add a function for counting planes in a pixel format.
avplay: remove the -debug option.
Revert "asfenc: return error on negative timestamp"
Conflicts:
doc/APIchanges
doc/ffplay.texi
ffplay.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'efa7f4202088c70caba11d7834641bc6eaf41830':
Use the avstring.h locale-independent character type functions
avstring: Add locale independent versions of some ctype.h functions
Conflicts:
avprobe.c
doc/APIchanges
libavcodec/dvdsubdec.c
libavcodec/utils.c
libavutil/avstring.c
libavutil/avstring.h
libavutil/eval.c
libavutil/parseutils.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The escape API will be useful to perform escaping programmatically, which
is required when crafting argument strings, and will be used for context
printing as well.
This is based on the ffescape tool code, with a few extensions and fixes.
Clément Bœsch
Michael Niedermayer
Masaki Tanaka
Anton Khirnov
Nicolas George
Stefano Sabatini
Paul B Mahol
Reimar Döffinger
Justin Ruggles