* qatar/master:
vc1: Use codec ID from AVCodecContext while parsing frame header
avplay: support mid-stream sample rate changes
Conflicts:
ffplay.c
libavcodec/vc1.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a segfault with samples that I have (both of them MPEG-TS). Looks like
avctx->codec is not being set during parsing.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
The existing code is not in the right place and it should cover both
interlaced frame and field pictures.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* qatar/master:
MSS1 and MSS2: set final pixel format after common stuff has been initialised
MSS2 decoder
configure: handle --disable-asm before check_deps
x86: Split inline and external assembly #ifdefs
configure: x86: Separate inline from standalone assembler capabilities
pktdumper: Use a custom define instead of PATH_MAX for buffers
pktdumper: Use av_strlcpy instead of strncpy
pktdumper: Use sizeof(variable) instead of the direct buffer length
Conflicts:
Changelog
configure
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/dct-test.c
libavcodec/imgconvert.c
libavcodec/mss12.c
libavcodec/version.h
libavfilter/x86/gradfun.c
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
make av_interleaved_write_frame() flush packets when pkt is NULL
mpegts: Fix dead error checks
vc1: Do not read from array if index is invalid.
targa: convert to bytestream2.
rv34: set mb_num_left to 0 after finishing a frame
Conflicts:
libavcodec/targa.c
libavcodec/vc1data.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is currently only handled in the parser code for WMV/ASF style
header, but not the one used in the bytestream format used when
muxed into MPEG-TS as on e.g. BluRay.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (29 commits)
sbrdsp.asm: convert all instructions to float/SSE ones.
dv: cosmetics.
dv: check buffer size before reading profile.
Revert "AAC SBR: group some writes."
udp: Print an error message if bind fails
cook: extend channel uncoupling tables so the full bit range is covered.
roqvideo: cosmetics.
roqvideo: convert to bytestream2 API.
dca: don't use av_clip_uintp2().
wmall: fix build with -DDEBUG enabled.
smc: port to bytestream2 API.
AAC SBR: group some writes.
dsputil: remove shift parameter from scalarproduct_int16
SBR DSP: unroll sum_square
rv34: remove dead code in intra availability check
rv34: clean a bit availability checks.
v4l2: update documentation
tgq: convert to bytestream2 API.
parser: remove forward declaration of MpegEncContext
dca: prevent accessing static arrays with invalid indexes.
...
Conflicts:
doc/indevs.texi
libavcodec/Makefile
libavcodec/dca.c
libavcodec/dvdata.c
libavcodec/eatgq.c
libavcodec/mmvideo.c
libavcodec/roqvideodec.c
libavcodec/smc.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
smacker: Sanity check huffman tables found in the headers.
smacker: remove dead store
qdm2: Check data block size for bytes to bits overflow.
mxfdec: Fix files with essence containers larger than 2 GiB.
mxfdec: Employ correct printf conversion specifiers for POSIX int types.
vc1: always read the bfraction element for interlaced fields
fate: add XWD image regression test
lavf: prevent infinite loops while flushing in avformat_find_stream_info
matroskadec: Pad AAC extradata.
ismindex: Fix build on mingw
Conflicts:
libavformat/mxfdec.c
libavformat/utils.c
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, it would not be read if refdist_flag was not set, however
according to the spec and the reference decoder, it should always be read.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master:
Remove ffmpeg.
aacenc: Simplify windowing
aacenc: Move saved overlap samples to the beginning of the same buffer as incoming samples.
aacenc: Deinterleave input samples before processing.
aacenc: Store channel count in AACEncContext.
aacenc: Move Q^3/4 calculation to it's own table
aacenc: Request normalized float samples instead of converting s16 samples to float.
aacpsy: Replace an if with FFMAX in LAME windowing.
aacenc: cosmetics, replace 'rd' with 'bits' in codebook_trellis_rate to make it more clear what is being calculated.
aacpsy: cosmetics, change a FIXME to a NOTE about subshort comparisons
aacenc: cosmetics: move init() and end() to the bottom of the file.
aacenc: aac_encode_init() cleanup
XWD encoder and decoder
vc1: don't read the interpfrm and bfraction elements for interlaced frames
mxfdec: fix memleak on mxf_read_close()
westwood: split the AUD and VQA demuxers into separate files.
Conflicts:
.gitignore
Changelog
Makefile
configure
doc/ffmpeg.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/aacenc.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
libavformat/img2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This matches the spec as well as the reference decoder, and fixes a bug
with interlaced frame decoding.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master:
vc1: use an enum for Frame Coding Mode
doc: cleanup filter section
indeo3: error out if no motion vector is set.
x86inc: Flag shufps as an floating-point instruction for the AVX emulation code.
mpegaudio: do not use init_static_data() for initializing tables.
musepack: fix signed shift overflow in mpc_read_packet()
mov: Make format string match variable type.
wmavoice: Make format string match variable type.
vc1: select interlaced scan table by FCM element
Generalize RIFF INFO tag support; support reading INFO tag in wav
pthread: track thread existence in a separate variable.
Conflicts:
doc/filters.texi
libavcodec/pthread.c
libavformat/avi.c
libavformat/riff.c
libavformat/riff.h
libavformat/wav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
prores: add FATE tests
id3v2: reduce the scope of some non-globally-used symbols/structures
id3v2: cosmetics: move some declarations before the places they are used
shorten: remove the flush function.
shn: do not allow seeking in the raw shn demuxer.
avformat: add AVInputFormat flag AVFMT_NO_BYTE_SEEK.
avformat: update AVInputFormat allowed flags
avformat: don't unconditionally call ff_read_frame_flush() when trying to seek.
truespeech: use sizeof() instead of hardcoded sizes
truespeech: remove unneeded variable, 'consumed'
truespeech: simplify truespeech_read_frame() by using get_bits()
truespeech: decode directly to output buffer instead of a temp buffer
truespeech: check to make sure channels == 1
truespeech: check for large enough output buffer rather than truncating output
truespeech: remove unneeded zero-size packet check.
mlpdec: return meaningful error codes instead of -1
mlpdec: remove unnecessary wrapper function
mlpdec: only calculate output size once
mlpdec: validate that the reported channel count matches the actual output channel count
pcm: reduce pointer type casting
...
Conflicts:
libavformat/avformat.h
libavformat/id3v2.c
libavformat/id3v2.h
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Both v->fcm and v->field_mode are used in common code, now they won't be
reset for progressive frame after interlaced one causing writing past the
frame end for example.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master: (34 commits)
h264: reset h->ref_count in case of errors in ff_h264_decode_ref_pic_list_reordering()
error_resilience: fix the check for missing references in ff_er_frame_end() for H264
4xm: prevent NULL dereference with invalid huffman table
4xmdemux: prevent use of uninitialized memory
4xm: clear FF_INPUT_BUFFER_PADDING_SIZE bytes in temporary buffers
ptx: check for out of bound reads
tiffdec: fix out of bound reads/writes
eacmv: check for out of bound reads
eacmv: fix potential pointer arithmetic overflows
adpcm: fix out of bound reads due to integer overflow
anm: prevent infinite loop
avsdemux: check for out of bound writes
avs: check for out of bound reads
avsdemux: check for corrupted data
AVOptions: refactor set_number/write_number
AVOptions: cosmetics, rename static av_set_number2() to write_number().
AVOptions: cosmetics, move and rename static av_set_number().
AVOptions: split av_set_string3 into opt type-specific functions
avidec: fix signed overflow in avi_sync()
mxfdec: Fix some buffer overreads caused by the misuse of AVPacket related functions.
...
Conflicts:
Changelog
configure
libavcodec/ptx.c
libavcodec/ra144.c
libavcodec/vaapi_vc1.c
libavcodec/vc1.c
libavcodec/version.h
libavformat/4xm.c
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vp6: partially propagate huffman tree building errors during coeff model parsing and fix misspelling
mpeg12: propagate chunk decode errors and fix conditional indentation
vc1: fix VC-1 Pulldown handling.
VC1: Fix first/last row checks with slices
mp4: Handle non-trivial ES Descriptors.
vc1: properly zero coded_block[] edges on new slice entry.
Conflicts:
libavcodec/vc1dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Pulldown flags are being set incorrectly and AVFrame->repeat_pict is not
being set. Also, skipped frames exit header parsing too early and do not
set pulldown flags appropriately. Ticks_per_frame needs to be set and
time_base adjusted so player can extend frame duration by a field time.
This fixes problems encountered when attempting to transcode HD-DVD EVOB
files with HandBrake. Also makes these files play smoothly in avplay.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
avconv: print the codecs names in the stream mapping.
avconv: move the avcodec_find_decoder() call to add_input_streams().
Windows Media Image decoder (WMVP/WVP2)
ac3enc: remove outdated TODO comment for apply_channel_coupling()
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/vc1dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
avcodec_set_dimensions should be used for size changes to ensure
compatibility with future changes.
avctx->width/avctx->height may not be set to display-only dimensions.
Even more so since vc1dec.c would later set coded_width/height based
on this.
coded_width/coded_height should be used instead of width/height for
decoder setup.
This fixes playback of e.g. zz-mcr-nsqr.vc1 sample (containing
display width/height settings) in MPlayer and should fix a crash
with MPC: http://forum.doom9.org/showthread.php?t=162221.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
rv30: return AVERROR(EINVAL) instead of EINVAL
build: add -L flags before existing LDFLAGS
simple_idct: whitespace cosmetics
simple_idct: make repeated code a macro
dsputil: remove huge #if 0 block
simple_idct: change 10-bit add/put stride from pixels to bytes
dsputil: allow 9/10-bit functions for non-h264 codecs
dnxhd: rename some data tables
dnxhdenc: remove inline from function only called through pointer
dnxhdenc: whitespace cosmetics
swscale: mark YUV422P10(LE,BE) as supported for output
configure: add -xc99 to LDFLAGS for Sun CC
Remove unused and non-compiling vestigial g729 decoder
Remove unused code under G729_BITEXACT #ifdef.
mpegvideo: fix invalid picture unreferencing.
dsputil: Remove extra blank line at end.
dsputil: Replace a LONG_MAX check with HAVE_FAST_64BIT.
simple_idct: add 10-bit version
Conflicts:
Makefile
libavcodec/g729data.h
libavcodec/g729dec.c
libavcodec/rv30.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Hendrik Leppkes
Michael Niedermayer
Mashiat Sarker Shakkhar
Diego Biurrun
Alberto Delmás
Mashiat Sarker Shakkhar
Reimar Döffinger
Martin Storsjö
Luca Barbato
Kostya Shishkov
John Stebbins