This will replace the 1024 character limited filename field. Compatiblity for
output contexts are provided by copying filename field to URL if URL is unset
and by providing an internal function for muxers to set both url and filename
at once.
Signed-off-by: Marton Balint <cus@passwd.hu>
Every bitstream filter behaves as intended now, so there's no need to
wait for the first packet of every stream.
Signed-off-by: James Almer <jamrial@gmail.com>
It has no reason to be in a public header, even if defined as private.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This makes the autobsf feature behave the same as the manual
bitstream filtering in ffmpeg.c
Fixes ticket #6794
Reviewed-by: rcombs
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
If flushing is not disabled, then mux.c will signal the end of the packets with
an AVIO_DATA_MARKER_FLUSH_POINT, and aviobuf will be able to decide to flush or
not based on the preferred minimum packet size set by the used protocol.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
This patch deprecates anything that has to do with merging/splitting
side data. Automatic side data merging (and splitting), as well as all
API symbols involved in it, are removed completely.
Two FF_API_ defines are dedicated to deprecating API symbols related to
this: FF_API_MERGE_SD_API removes av_packet_split/merge_side_data in
libavcodec, and FF_API_LAVF_KEEPSIDE_FLAG deprecates
AVFMT_FLAG_KEEP_SIDE_DATA in libavformat.
Since it was claimed that changing the default from merging side data to
not doing it is an ABI change, there are two additional FF_API_ defines,
which stop using the side data merging/splitting by default (and remove
any code in avformat/avcodec doing this): FF_API_MERGE_SD in libavcodec,
and FF_API_LAVF_MERGE_SD in libavformat.
It is very much intended that FF_API_MERGE_SD and FF_API_LAVF_MERGE_SD
are quickly defined to 0 in the next ABI bump, while the API symbols are
retained for a longer time for the sake of compatibility.
AVFMT_FLAG_KEEP_SIDE_DATA will (very much intentionally) do nothing for
most of the time it will still be defined. Keep in mind that no code
exists that actually tries to unset this flag for any reason, nor does
such code need to exist. Code setting this flag explicitly will work as
before. Thus it's ok for AVFMT_FLAG_KEEP_SIDE_DATA to do nothing once
side data merging has been removed from libavformat.
In order to avoid that anyone in the future does this incorrectly, here
is a small guide how to update the internal code on bumps:
- next ABI bump (probably soon):
- define FF_API_LAVF_MERGE_SD to 0, and remove all code covered by it
- define FF_API_MERGE_SD to 0, and remove all code covered by it
- next API bump (typically two years in the future or so):
- define FF_API_LAVF_KEEPSIDE_FLAG to 0, and remove all code covered
by it
- define FF_API_MERGE_SD_API to 0, and remove all code covered by it
This forces anyone who actually wants packet side data to temporarily
use deprecated API to get it all. If you ask me, this is batshit fucked
up crazy, but it's how we roll. Making AVFMT_FLAG_KEEP_SIDE_DATA to be
set by default was rejected as an ABI change, so I'm going all the way
to get rid of this once and for all.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
This seems to have been added by mistake in 11de006b, by not
noticing the negation for the existing condition. This block does
not contain any code that accesses the codec field in AVStream.
This function is meant to serve as a complement to compute_pkt_fields2,
which is guarded by FF_API_COMPUTE_PKT_FIELDS2 && FF_API_LAVF_AVCTX.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '785c25443b56adb6dbbb78d68cccbd9bd4a42e05':
movenc: Apply offsets on timestamps when peeking into interleaving queues
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The bitstream filters do not work with merged in side data
This leaves the input packet split if it is being split.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit fba2a8a254.
The changes were right for av_write_frame() but not for av_interleaved_write_frame().
The following commit will fix this in a simpler way.
Signed-off-by: James Almer <jamrial@gmail.com>
Similarly, merge it back before returning.
Fixes ticket #5927.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This allows a consumer to run the muxer's init function without actually
writing the header, which is useful in chained muxers that support
automatic bitstream filtering.
This is mostly useful for muxers that wrap other muxers, such as dashenc
and segment. The actual duplicated bitstream filtering is largely harmless,
but delaying the header can cause problems when the muxer intended the header
to be written to a separate file.
Restore original timestamps in write_packet() if the
actual write operation was not successfull. This allows
to pass the same packet to nonblocking muxer repeatedly
without corrupting the timestamps.
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e1eb0fc960163402bbb4e630185790488f7d28ed':
movenc: Use packets in interleaving queues for the duration at the end of fragments
Merged-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
* commit 'db7968bff4851c2be79b15b2cb2ae747424d2fca':
avio: Allow custom IO users to get labels for the output bytestream
Merged-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
Docs clearly states that av_write_trailer should only be called if
avformat_write_header was successful, therefore we have to deinit if we return
failure.
Signed-off-by: Marton Balint <cus@passwd.hu>
As long as caller only writes packets using av_interleaved_write_frame
with no manual flushing, this should allow us to always have accurate
durations at the end of fragments, since there should be at least
one queued packet in each stream (except for the stream where the
current packet is being written, but if the muxer itself does the
cutting of fragments, it also has info about the next packet for that
stream).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows callers with avio write callbacks to get the bytestream
positions that correspond to keyframes, suitable for live streaming.
In the simplest form, a caller could expect that a header is written
to the bytestream during the avformat_write_header, and the data
output to the avio context during e.g. av_write_frame corresponds
exactly to the current packet passed in.
When combined with av_interleaved_write_frame, and with muxers that
do buffering (most muxers that do some sort of fragmenting or
clustering), the mapping from input data to bytestream positions
is nontrivial.
This allows callers to get directly information about what part
of the bytestream is what, without having to resort to assumptions
about the muxer behaviour.
One keyframe/fragment/block can still be split into multiple (if
they are larger than the aviocontext buffer), which would call
the callback with e.g. AVIO_DATA_MARKER_SYNC_POINT, followed by
AVIO_DATA_MARKER_UNKNOWN for the second time it is called with
the following data.
Signed-off-by: Martin Storsjö <martin@martin.st>
Marton Balint
James Almer
Michael Niedermayer
Clément Bœsch
Muhammad Faiz
Vittorio Giovara
wm4
Diego Biurrun
Martin Storsjö
Rodger Combs
Hendrik Leppkes
Carl Eugen Hoyos
Jan Sebechlebsky
Matthieu Bouron
Clément Bœsch