add a per-stream option for setting the encoder timebase.
the following values are allowed:
0 - for video, use 1/frame_rate, for audio use 1/sample_rate (this is
the default)
-1 - match the input timebase (when possible)
>0 - set the timebase to provided number
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The old "API" that signaled rotation as a metadata value has been
replaced by DISPLAYMATRIX side data quite a while ago.
There is no reason to make muxers/demuxers/API users support both. In
addition, the metadata API is dangerous, as user tags could "leak" into
it, creating unintended features or bugs.
ffmpeg CLI has to be updated to use the new API. In particular, we must
not allow to leak the "rotate" tag into the muxer. Some muxers will
catch this properly (like mov), but others (like mkv) can add it as
generic tag. Note applications, which use libavformat and assume the
old rotate API, will interpret such "rotate" user tags as rotate
metadata (which it is not), and incorrectly rotate the video.
The ffmpeg/ffplay tools drop the use of the old API for muxing and
demuxing, as all muxers/demuxers support the new API. This will mean
that the tools will not mistakenly interpret per-track "rotate" user
tags as rotate metadata. It will _not_ be treated as regression.
Unfortunately, hacks have been added, that allow the user to override
rotation by setting metadata explicitly, e.g. via
-metadata:s:v:0 rotate=0
See references to trac #4560. fate-filter-meta-4560-rotate0 tests this.
It's easier to adjust the hack for supporting it than arguing for its
removal, so ffmpeg CLI now explicitly catches this case, and essentially
replaces the "rotate" value with a display matrix side data. (It would
be easier for both user and implementation to create an explicit option
for rotation.)
When the code under FF_API_OLD_ROTATE_API is disabled, one FATE
reference file has to be updated (because "rotate" is not exported
anymore).
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
If a subtitle packet came before the first video frame could be fully
decoded, the subtitle packet would get discarded. This puts the subtitle
into a queue instead, and processes it once the attached filter graph is
initialized.
Be more careful when an input stream encounters EOF when its filtergraph
has not been configured yet. The current code would immediately mark the
corresponding output streams as finished, while there may still be
buffered frames waiting for frames to appear on other filtergraph
inputs.
This should fix the random FATE failures for complex filtergraph tests
after a3a0230a98
This merges Libav commit 94ebf55. It was previously skipped.
This is the last filter init related Libav commit that was skipped, so
this also removes the commits from doc/libav-merge.txt.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This makes sure the actual stream parameters are used, which is
important mainly for hardware decoding+filtering cases, which would
previously require various weird workarounds to handle the fact that a
fake software graph has to be constructed, but never used.
This should also improve behaviour in rare cases where
avformat_find_stream_info() does not provide accurate information.
This merges Libav commit a3a0230. It was previously skipped.
The code in flush_encoders() which sets up a "fake" format wasn't in
Libav. I'm not sure if it's a good idea, but it tends to give
behavior closer to the old one in certain corner cases.
The vp8-size-change gives different result, because now the size of
the first frame is used. libavformat reported the size of the largest
frame for some reason.
The exr tests now use the sample aspect ratio of the first frame. For
some reason libavformat determines 0/1 as aspect ratio, while the
decoder returns the correct one.
The ffm and mxf tests change the field_order values. I'm assuming
another libavformat/decoding mismatch.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This will be useful in the following commit, after which the muxer
timebase is not always available when encoding.
This merges Libav commit 3e265ca. It was previously skipped.
There are some changes with how/when the mux_timebase field is set,
because the Libav approach often causes a too imprecise time base
to be set. This is hard, because the muxer's write_header function
can readjust the timebase, at which point we might already have
encoded packets buffered. (It might be better to buffer them after
the encoder, instead of after all the timestamp handling logic
before muxing.)
The two FATE tests change because the output time base is raised
for subtitles. (Needed to avoid certain rounding issues in other
cases.)
Includes a minor merge fix by Mark Thompson, and
avconv: Move rescale to stream timebase before monotonisation
also by Mark Thompson <sw@jkqxz.net>.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Reason: For some cases, such as 2 or more graphics cards existing, the
default command line may fail because ffmpeg does not open the correct
device node:
ffmpeg -hwaccel qsv -c:v h264_qsv -i test.264 -c:v h264_qsv out.264
Let user choose the proper one by running like below:
ffmpeg -hwaccel qsv -qsv_device /dev/dri/renderD128 -c:v h264_qsv \
-i test.264 -c:v h264_qsv out.264
Signed-off-by: ChaoX A Liu <chaox.a.liu@gmail.com>
Signed-off-by: Huang, Zhengxu <zhengxu.maxwell@gmail.com>
Signed-off-by: Andrew, Zhang <huazh407@gmail.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
* commit '398f015f077c6a2406deffd9e37ff34b9c7bb3bc':
avconv: buffer the packets written while the muxer is not initialized
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1c169782cae6c5c430ff62e7d7272dc9d0e8d527':
avconv: explicitly postpone writing the header until all streams are initialized
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This is a bit messy, mainly due to timestamp handling.
decode_video() relied on the fact that it could set dts on a flush/drain
packet. This is not possible with the old API, and won't be. (I think
doing this was very questionable with the old API. Flush packets should
not contain any information; they just cause a FIFO to be emptied.) This
is replaced with checking the best_effort_timestamp for AV_NOPTS_VALUE,
and using the suggested DTS in the drain case.
The modified tests (fate-cavs and others) still fails due to dropping
the last frame. This happens because the timestamp of the last frame
goes backwards (ffprobe -show_frames shows the same thing). I suspect
that this "worked" due to the best effort timestamp logic picking the
DTS over the decreasing PTS. Since this logic is in libavcodec (where
it probably shouldn't be), this can't be easily fixed. The timestamps
of the cavs samples are weird anyway, so I chose not to fix it.
Another strange thing is the timestamp handling in the video path of
process_input_packet (after the decode_video() call). It looks like
the code to increase next_dts and next_pts should be run every time
a frame is decoded - but it's needed even if output is skipped.
With the new decode API, doing this in ffmpeg.c is impractical. There
was resistance against removing the warning, so put it into libavcodec.
Not bothering with reducing the warning to verbose log level for
subsequent wanrings. The warning should be rare, and only happen when
developing new codecs for the old API.
Includes a change suggested by Michael Niedermayer.
This commit is based on commit 35c8580 from Anton Khirnov <anton@khirnov.net>
which was skipped in b8945c4.
The avcodec_copy_context() call in the encode path is left in place for now
as AVStream.codec is apparently still required even after porting ffmpeg to
the new bsf API.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit is initially largely based on commit 4426540 from Anton
Khirnov <anton@khirnov.net> and two following fixes (80fb19b and
fe7b21c) which were previously skipped respectively in 98e3153, c9ee36e,
and 7fe7cdc.
mpeg4-bsf-unpack-bframes FATE reference is updated because the bsf
filter now actually fixes the extradata (mpeg4_unpack_bframes_init()
changing one byte is now honored on the output extradata).
The FATE references for remove_extra change because the packet flags
were wrong and the keyframes weren't marked, causing the bsf relying on
these proprieties to not actually work as intended.
The following was fixed by James Almer:
The filter option arguments are now also parsed correctly.
A hack to propagate extradata changed by bitstream filters after the
first av_bsf_receive_packet() call is added to maintain the current
behavior. This was previously done by av_bitstream_filter_filter() and
is needed for the aac_adtstoasc bsf.
The exit_on_error was not being checked anymore, and led to an exit
error in the last frame of h264_mp4toannexb test. Restoring this
behaviour prevents erroring out. The test is still changed as a result
due to the badly filtered frame now not being written after the failure.
Signed-off-by: Clément Bœsch <u@pkh.me>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit is largely based on commit 15e84ed3 from Anton Khirnov
<anton@khirnov.net> which was previously skipped in bbf5ef9d.
There are still a bunch of things raising codecpar related warnings that
need fixing, such as:
- the use of codec->debug in the interactive debug mode
- read_ffserver_streams(): it's probably broken now but there is no test
- lowres stuff
- codec copy apparently required by bitstream filters
The matroska references are updated because they now properly forward
the field_order (previously unknown, now progressive).
Thanks to James Almer for fixing a bunch of FATE issues in this commit.
Signed-off-by: Clément Bœsch <clement@stupeflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '49670e4218d34899a1c37abb7a11615efc16f757':
avconv: add a function for determining whether a filtergraph is simple
Conflicts:
avconv.c
Merged-by: Timothy Gu <timothygu99@gmail.com>
* commit 'bd49be885e9ad6bae599c54473ba2fa2957eb140':
avconv_vdpau: use the hwcontext API to simplify code
Tested-by: wm4
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
a set ost->frame_rate does not imply CFR in ffmpeg
The changed fate tests had all wrong packet durations
(like 1/1000 or 1/90000)
There might be more cases in which is_cfr could be set
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'fb472e1a11a4e0caed2c3c91da01ea8e35d9e3f8':
avconv: add support for Intel QSV-accelerated transcoding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '5d3addb937946eca5391e40b5e6308e74ac6f77b':
Add a quality factor packet side data
Conflicts:
doc/APIchanges
ffmpeg.c
libavcodec/avcodec.h
libavcodec/mpegvideo_enc.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '16302246b1fcb7ad4e6f7bd31c49956a455336d2':
avconv: Add an option for automatically rotating video according to display matrix
Conflicts:
Changelog
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This improves the last frames duration with CFR and when the input durations
are inaccurate or missing
Fixes Ticket4119
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
James Almer
erankor
wm4
Clément Bœsch
Timo Rothenpieler
Anton Khirnov
Sasi Inguva
Michael Bradshaw
Zhengxu
Hendrik Leppkes
DeHackEd
Michael Niedermayer
Clément Bœsch
Timothy Gu
Derek Buitenhuis
Rodger Combs
Bryan Huh
Marton Balint
Sebastien Zwickert
Michael Niedermayer
Nicolas George