When user use the hls_wrap, there have many problem:
1. some platform refersh the old but usefull segment
2. CDN(Content Delivery Network) Deliver HLS not friendly
The hls_wrap is used to wrap segments for use little space,
now user can use hls_list_size and hls_flags delete_segments
instead it.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Adds a `-hls_flags +temp_file` which will write segment data to
filename.tmp, and then rename to filename when the segment is complete.
This patch is similar in spirit to one used in Plex's ffmpeg fork, and
allows a transcoding webserver to ensure incomplete segment files are
never served up accidentally.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Bodecs Bela <bodecsb@vivanet.hu>
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Detecting a leap second depends on a lot of things, segment time, segment
offset, system leap second implementation, the removed part is a huge
simplification which can be misleading, so it is best to remove it.
Signed-off-by: Marton Balint <cus@passwd.hu>
start_number option starts the playlist sequence number
(#EXT-X-MEDIA-SEQUENCE) from the specified number. Unless hls_flags
single_file is set, it also specifies starting sequence numbers of
segment and subtitle filenames. Sometimes it is usefull to have unique
starting numbers at each run, but currently it is only achiveable by
setting this parameter manually.
This patch enables to specify start_number source parameter by
introducing hls_start_number_source with 3 possible values:
generic/epoch/datetime. This ensures to set start sequence number
automatically for practically unique numbers. Generic option is the
default and this is the curent behaviour: start_number option value
specifies the start sequence number. (start_number default value is 0)
If hls_start_number_source is set to epoch, then the start number will
be the seconds since epoch (1970-01-01 00:00:00). If set to datetime,
then the start sequence number will be based on the current date/time
value as YYYYmmddHHMMSS. e.g. 20161231235659.
Hls speficication allows 64 bit integers as sequence numbers. This patch
also changes some code where only 32 bit integer values were handled
correctly.
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
1st:
This patch makes it possible to put actual segment file size (measured
in bytes) and/or duration (calculated in microseconds) into segment
filenames. This feature is useful when post-processing live streaming
access log files. New behaviour works only when -use_localtime option
is set and second_level_segment_size or/and
second_level_segment_duration new hls_flags are specified. %%s is the
placeholder for size and %%t for duration in hls_segment_filename
option. Fix sized trailing zeropadding also works eg. %%09s or %%023t.
A command to test new features:
./ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i sine=f=440:b=4:r=44100 -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags
second_level_segment_index+second_level_segment_size+second_level_segment_duration
-use_localtime 1 -use_localtime_mkdir 1 -hls_segment_filename
"segment_%Y%m%d%H%M%S_%%04d_%%08s_%%013t.ts" stream.m3u8
2nd:
doc/muxers: beside second_level_segment_duration and second_level_segment_size,
added some more details and example to hls_segment_filename,
use_localtime, use_localtime_mkdir, hls_flags. hls_flags option list
reformatted to table
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in filenames
Putting date/time values into segment filenames is very usefull.
But to produce non-conflicting segment filenames with -use_localtime
option with date/time
values in hls_segment_filename option, sometimes is not enough.
Like in cases when multiple segments produced in the same second.
But hlsenc currently does not make possible to use segment index (%d) at
the
same time whe use_localtime is in effect, due to identifier conflict.
This patch makes possible to use strftime identifiers and still put
segment index (%d) at same time in segment filenames by introducing
second_level_segment_index flag. When -use_localtime is active,
identifier %d is for month day index, so %%d is the segment index
placeholder. This enhanced behaviour only exists when new
second_level_segment_index flag is specified.
For instance putting 'segment_%Y%m%d%H%M%S_%%05d.ts' value into
-hls_segment_filename option and specifing -hls_flags
second_level_segment_index and -use_localtime 1, may produce segment
filename as 'segment_20161230235758_00002.ts'
An example:
ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i anullsrc=r=44100:cl=stereo -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags delete_segments+second_level_segment_index -use_localtime 1
-hls_segment_filename "segment_%Y%m%d%H%M%S_%%05d.ts" stream.m3u8
will produce segments filenames:
....
segment_20161227005902_00013.ts
segment_20161227005902_00014.ts
segment_20161227005902_00015.ts
segment_20161227005903_00016.ts
segment_20161227005903_00017.ts
segment_20161227005903_00018.ts
segment_20161227005903_00019.ts
segment_20161227005903_00020.ts
....
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Examples use the native FFmpeg AAC encoder but it is no longer
considered experimental and therefore not required.
Signed-off-by: Lou Logan <lou@lrcd.com>
mythtv have problem with non-seekable dont write duration and filesize
and there have problem with some other server and player with 0 value
duation and filesize.
So add a flv flags to fix the ticket and make a choose for users.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Add keyframe index metadata
Used to facilitate seeking; particularly for HTTP pseudo streaming.
1. read live streaming or file by sequence
2. if use add_keyframe_index option, add a mark flag at the position,
use to insert new context at the last step.
3. add the keyframes *offset* and *timestamp* into a list
4. if use add_keyframe_index option, shift the metadata data from
mark flag offset
5. insert the keyframes *offset* and *timestamp* from the list by
sequence
6. free the list
7. end.
Add FATE test case;
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Steven Liu <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids continuity check failures in concatenated streams
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Thanks to Mathieu Malaterre <malat@debian.org> for reporting the
Que/Queue typo. (https://bugs.debian.org/839542)
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
There is really no need for two aac wrappers, we already have
libfdk-aac which is better. Not to mention that faac doesn't
even support HEv1, or HEv2. It's also under a license which is
unusable for distribution, so it would only be useful to people
who will compile their own ffmpeg, only use it themselves (which
at that point should just use fdk-aac).
Signed-off-by: Josh de Kock <josh@itanimul.li>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
When ffmpeg exit by exception, start a new ffmpeg will
cover the old segment list, add this flag can continue
append the new segments into old hls segment list
Signed-off-by: LiuQi <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <liuqi@gosun.com>
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
support split hls segment at duration set by hls_time
Signed-off-by: LiuQi <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adds per slave option 'onfail' to the tee muxer allowing an output to
fail, so other slave outputs can continue.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: James Almer <jamrial@gmail.com>
For example you can split a file, keeping a continuous timecode between
each segment:
ffmpeg -i src.mov -timecode 10:00:00:00 -vcodec copy -f segment \
-segment_time 2 -reset_timestamps 1 -increment_tc 1 target_%03d.mov
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Use with -use_localtime, and set -hls_segment_filename to a path which
contains a subdirectory i.e. /some/path/%Y%m%d/%Y%m%dT%H%M%S-%s.ts
This will mkdir the %Y%m%d-part of the path if it does not already
exist.
In addition, each filename in the playlist output will be prefixed with
this subdirectory (if playlist and segment shares the same base path).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This can provide a manual workaround for ticket #4230.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
This option can force the segmenter to only start a new segment if a packet
reaches the muxer within the specified duration after the segmenting clock
time, which makes it more resilient to backward local time jumps, such as leap
seconds or transition to standard time from daylight savings time.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Also support disabling them as they seem to cause problems to some
Users. They are also not allowed in IRT D-10 thus the default for
mxf_d10 is not to write them
This also decreases the filesize when no user comment are stored
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It makes possible to put multiple stream specifier into the select
option separated by comma.
eg. select=\'a:0,v\'
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Nicolas George <george@nsup.org>
Michael Niedermayer
Steven Liu
Mulvya
Aman Gupta
Marton Balint
Tobias Rapp
Bodecs Bela
Jan Sebechlebsky
Lou Logan
rogerdpack
Andreas Cadhalpun
Moritz Barsnick
Josh de Kock
Steven Liu
Carl Eugen Hoyos
Benoit Fouet
Stefano Sabatini
Rodger Combs
Martin Vignali
Adam Kent
Johan Ström
Stefan Pöschel
Ronald S. Bultje